Table of Contents
Advertisement
6.7
System Settings
6.7.1
Web Interface Unit
The web interface supports units in millimeters (mm) and inches in the display of the measurement results. Data output
via Ethernet/analog output is not affected by this setting.
Changing the Unit
►
Switch to the tab
Settings
►
Make the desired settings and confirm them by pressing
6.7.2
Load & Save
All the sensor settings can be saved permanently in user programs, which are known as setups.
Fig. 6.26: Managing User Settings
Defining, Saving, or Loading Data Sets
►
Switch to the tab
Settings
►
Make the desired settings and confirm them by pressing
Saving the Settings
menu
New setup
Enter the name for the setup
in the
Individual setup
field,
e.g.,
Pro
name
file_F14T6 and confirm the
entry with the
button.
Save
Fig. 6.20: Managing Setups in the Sensor, Options and Sequence
Save setup on PC
menu
Load & Save
Click on the desired setup with the left mouse button.
The
Measurement settings
Click on the
button.
Export
optoCONTROL 2700
>
System settings
>
System settings
Activate existing setup
menu
Load & Save
Click on the desired setup with
the left mouse button.
The
Measurement settings
dialog opens.
Click on the
button.
Load
dialog opens.
>
Unit on the web
interface.
Save
settings.
>
Load &
Save.
Save
settings.
Save change in active setup
Menu bar
Click on the
Save
button in the horizon
tings
tal menu bar.
Load setup from PC
menu
Load & Save
Click on the desired setup with the left mouse button.
The
Measurement settings
Click on the
Browse
A Windows dialogue for file selection opens. Select the desired
file and click on the
Open
Determine setup after booting
menu
Load & Save
Click on the desired setup with
set-
the left mouse button.
The
Measurement settings
dialog opens.
Click on the
Favorite
dialog opens.
button.
button.
Advanced Settings
button.
Seite 70
Advertisement
Table of Contents
Need help?
Do you have a question about the optoCONTROL 2700 and is the answer not in the manual?