Resetting The Sensor; Light Source - MICRO-EPSILON optoCONTROL 2700 Operating Instructions Manual

6.7.5

Resetting the Sensor

You can reset individual settings to the factory setting in this menu area.
Measurement Settings
Device settings
Reset all
Restart sensor
Fig. 6.24:
Performing a Reset
► Switch to the tab
Settings
► Select the desired function.
6.7.6

Light Source

This allows the light source to be switched on and off in the sensor.
Light Source On/Off
► Switch to the tab
Settings
► Select the desired function.
optoCONTROL 2700
Resets the preset to the web edge option and all pa­
rameters, except for interface settings, to the factory
settings.
Resets all settings for the Ethernet and RS422 interfa­
ces to the factory settings.
Resets the device and measurement settings to facto­
ry settings.
The sensor is restarted with the most recently stored
settings.
> >
System settings
> >
System settings
Reset sensor.
Light source.
Advanced Settings
Seite 73