Omron L User Manual page 97

Section 5
DETAILED SETTINGS
Setting Hysteresis Width (when UP or DOWN Is Selected)
9.
Use the LEFT and RIGHT Keys to display
[H-HYS] on the main display.
[H-HYS] will not be displayed if timing input [TIMIG] is set
as the trigger.
10.
Press the UP or DOWN Key.
The leftmost digit of the sub-display will flash.
11.
Use the Cursor Keys to set the hysteresis
width for the trigger level.
12.
Press the ENT Key to confirm the setting.
The hysteresis width will be registered.
ZX-L-N
80
User's Manual
LD ON ZERO ENABLE
(mm)
SUB
Moves from one digit to
another.
Changes the current value.
SUB