Omron L User Manual page 87

Section 5
DETAILED SETTINGS
5.
Press the ENT Key to confirm the setting.
The sub-display will show [P1SCL].
6.
Set the sensing object at the position where
the display value change is required.
Set the sensing object within the measurement distance. The ENABLE indicator will be lit when the
sensing object is within the measurement distance. Scaling is not possible if the sensing object is
not within the distance.
7.
Press any Cursor Key.
The current measured value will be displayed on the
main display.
The leftmost digit of the sub-display will flash.
8.
Use the Cursor Keys to set the offset for the
measured value in the sub-display.
The position of the decimal point can be changed using
the next steps.
9.
Press the ENT Key to confirm the setting.
The decimal point will flash.
10.
Use the LEFT and RIGHT Keys to change
the position of the decimal point, if necessary.
11.
Press the ENT Key to confirm the setting.
The inverted display settings will appear on the sub-
display.
ZX-L-N
70
User's Manual
LD ON ZERO ENABLE
(mm)
SUB
LD ON ZERO ENABLE
(mm)
SUB
Moves from one digit to
another.
Changes the current value.
SUB
SUB