Key Operations; Alphabet Display Format - Omron L User Manual

Section 3
BASIC OPERATION

Alphabet Display Format

The alphabet appears on the main and sub-displays as shown in the following table.

Key Operations

Use the Control Keys to change the display and set measurement conditions.
The mode currently selected determines the key functions.
Switching Modes p.34
Cursor
Keys
ENT Key
ZX-L-N
36
User's Manual
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
LD ON
Key
RUN Mode
LEFT Key Changes sub-display
content.
RIGHT Key
UP Key Performs timing input.
DOWN Key If the Sensor Head is
the through-beam
type, this cursor key is
used to input reset
signal.
If the Sensor Head is
the through-beam
type, this cursor key is
used to set the
standard received light
amount.
When held down for
one second: Performs
zero reset.
When held down
together with the Right
Key for three seconds:
Cancels zero reset.
Control Keys
Function
T Mode
Used when selecting Function changes
numeral digits. depending on setting.
• Switches function
• Selects numeral digit.
• Stops setting.
Used when changing Function changes
numerals. depending on setting.
• Switches between
• Changes numerals.
Function changes Confirms the set condition
depending on or value.
operation.
• Confirms threshold
value.
• Executes teaching.
FUN Mode
display.
selections.