Precautions For Safe Use - Omron L User Manual

Introduction
Please observe the following precautions for safe use of the products.
Installation Environment
• Do not use the product in environments where it can be exposed to inflammable/
explosive gas.
• Do not install the product close to high-voltage devices and power devices in order
to secure the safety of operation and maintenance.
Power Supply and Wiring
• The supply voltage must be within the rated range (DC12 to 24V±10%).
• Reverse connection of power supply is not allowed. Connection to AC power supply
is also not allowed.
• Open-collector outputs should not be short-circuited.
• High-voltage lines and power lines must be wired separately from this product.
Wiring them together or placing in the same duct may cause induction, resulting in
malfunction or damage.
• Always turn off the power supply before connecting or disconnecting cables and
connectors.
Others
• ZX-E series (linear proximity type), and ZX-W series (microwave type) and ZX-T
series (high-precision contact type) must not be connected. Combined use of ZX-L
with these series is not allowed.
• Do not attempt to dismantle, repair, or modify the product.
• Dispose of this product as industrial waste.
ZX-L-N
viii
User's Manual

Precautions for Safe Use