Flow Of Operation - Omron L User Manual

Section 3
BASIC OPERATION

Flow of Operation

When Reflective Type
Sensor Head is
Connected
Installation and Connection
Preparation for
Measurement
Turn ON the power.
Making Settings According
to Your Application
Measuring Height
Measuring Thickness
Measuring Eccentricity
and Vibration
Measuring Edges
ZX-L-N
32
User's Manual
p.9
p.50
p.54
p.58
p.61
When Through-beam
Type Sensor Head is
Connected
Installation and Connection
Preparation for
Measurement
Turn ON the power.
Select the display unit (% or mm)
and the item to be measured
(received or blocked light
amount).
Setting the Auto Scale
(Not necessary if the two-point
scaling function is used)
Setting the Standard
Received Light Amount
p.45
Setting/Changing Measurement Contents
Setting Number of Samples to Average
Using Hold Functions
Comparing Measured Values
(Differentiation Function)
Comparing Measured Values (Previous
Value Comparisons)
Changing Display Scales
Setting the Measurement Sensitivity
(Gain Switching)
Setting Judgement Conditions
Entering Threshold Values
Setting Output Contents
Linear Output
Setting Judgement Output Timing
(If required)
Correcting the Measurement Reference
Point
Using the Zero Reset Function
p.9
p.42
p.66
p.76
p.83
p.86
p.67
p.74
p.88
p.95
p.104
p.116