Omron L User Manual page 76

Section 4
MAIN APPLICATIONS AND SETTING METHODS
Mounting to Device
Mount the Sensor Head to the inspection device.
When mounting the sensor, take care not to exert pressure on the sensor head and
wires.
Installing Sensor Heads p.18
Adjusting Setting Position
Adjust the position of the Sensor Head so that the distance (D) between the Sensor
Head and the sensing object is about the measuring center distance, as shown in the
diagram. Refer to the Amplifier Unit display while adjusting the Sensor Head position.
Measuring range p.130
D
ZX-L-N
59
User's Manual