Omron L User Manual page 88

Selecting Inverted Display
12.
Use the UP and DOWN Keys to select the
inverted display function.
Selection
D-FWD Not inverted.
The larger the distance between the Sensor
Head and the object, the larger the measured
value displayed on the Amplifier Unit.
D-INV Inverted
The larger the distance between the Sensor
Head and the object, the smaller the
measured value displayed on the Amplifier
Unit.
13.
Press the ENT Key to confirm the setting.
The sub-display will be [P2SCL].
14.
Press the ENT Key.
Confirming that Scaling Is Completed
If scaling has been completed correctly, the display will
be [OK].
If scaling was unable to be completed, the display will be
[NG].
Check that the sensing object is within the measurement
range and execute scaling again.
Details
Section 5
DETAILED SETTINGS
SUB
SUB
LD ON ZERO ENABLE
(mm)
SUB
LD ON ZERO ENABLE
(mm)
SUB
ZX-L-N
User's Manual
71