Omron L User Manual page 122

The following description uses the OFF-delay timer as an example. Make the necessary
adjustments if other timers are used.
Moving to FUN mode and TIMER
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
[TIMER] on the main display.
Selecting Timers
3.
Press the UP or DOWN Key.
The sub-display will flash.
4.
Use the UP or DOWN Key to select the
desired timer type.
5.
Press the ENT Key to confirm the setting.
The setting will be registered.
If anything other than [OFF] is selected, use the following
procedure to set the timer time.
Setting Timer Time (when a Timer Type Other Than OFF Is Selected)
6.
Use the LEFT and RIGHT Keys to display
[T-TIM] on the main display.
[T-TIM] cannot be displayed if [OFF] is selected.
Section 5
DETAILED SETTINGS
LD ON ZERO ENABLE
(mm)
SUB
SUB
SUB
LD ON ZERO ENABLE
(mm)
ZX-L-N
User's Manual
105