Section 7
APPENDIX
Display
ERRLH
An attempt was made to set a
numeric value larger than the HIGH
threshold value to the LOW threshold
value.
HIGH threshold - LOW threshold -
hysteresis width
ERRHL
An attempt was made to set a
numeric value smaller than the LOW
threshold value to the HIGH threshold
value.
HIGH threshold - LOW threshold -
hysteresis width
ERROV
The set numeric value is too large.
HIGH threshold - LOW threshold -
hysteresis width
ERRUD
The set numeric value is too small.
(*1) Displayed only for Reflective-type Sensor Heads.
ZX-L-N
128
User's Manual
Error
Input correct threshold values.
Input correct threshold values.
Input an appropriate numeric value.
Input an appropriate numeric value.
Countermeasure
Pages
p.88
p.88
p.38
p.38