Omron L User Manual page 68

Mounting to Device
Mount the Sensor Head to the inspection device.
When mounting the sensor, take care not to exert pressure on the sensor head and
wires.
Installing Sensor Heads p.18
Adjusting Setting Position
Place the reference sample in position and adjust the Sensor Head position. Refer to
the Amplifier Unit's display or Sensor Head's indicators, and adjust the Sensor Head
position so that the upper and lower limits of the height (H) to be measured fall within
the measuring range.
Measuring range p.130
Measured Value Display
The Amplifier Unit display shows the distance (D) from the reference sample.(Default)
The display can also be set to show the height (H) of the reference sample.
Changing Display Scales p.67
MAIN APPLICATIONS AND SETTING METHODS
D
H
Section 4
ZX-L-N
51
User's Manual