Omron L User Manual page 72

Mounting to Device
Connecting Amplifier Units
Connect two Amplifier Units by placing a Calculating Unit between them as shown in
the diagram.
The calculation result is displayed on (i.e., output to) the CH2 Amplifier Unit. Connect
the CH2 output cable to the external device to enable external control.
Connections p.21
The CH1 Amplifier Unit will display (output) the measurement result for the CH1 Sensor Head only.
If the Amplifier Units are connected, mutual interference between the Sensor Heads can also be
prevented.
Mounting Sensor Heads to Inspection Device
Mount the Sensor Heads to the steel plate in such a way that they face each other as
shown below.
Installing Sensor Heads p.18
Steel plate
MAIN APPLICATIONS AND SETTING METHODS
Section 4
CH1
Calculating Unit
CH2
ZX-L-N
User's Manual
55