Omron L User Manual page 80

Measuring Reference Samples
The edge of the reference sample is measured using position teaching and the
measurement result is registered as the HIGH threshold value.
The registered value becomes the reference for the threshold value set in step
Refer to Section 5 Detailed Settings for details on settings.
Position Teaching p.90
The reference sample edge can also be set to 0.
Using the Zero Reset Function p.116
Setting Tolerance Judgement Values
Refer to the HIGH threshold registered in step
(HIGH and LOW thresholds) for a PASS (OK) judgement.
The HIGH, PASS, and LOW judgement results will be output based on the threshold
values set here.
Measurement Result
Measurement result > HIGH threshold
LOW threshold ≤ Measurement result ≤ HIGH threshold
LOW threshold > Measurement result
Refer to Section 5 Detailed Settings for details on operation.
Inputting Threshold Values Directly p.89
MAIN APPLICATIONS AND SETTING METHODS
and set the upper and lower limits
Judgement
HIGH
PASS
LOW
Section 4
.
ZX-L-N
63
User's Manual