Condition Settings - Omron L User Manual

Condition Settings

Display the target function on the main display and select the desired value from the
sub-display to set measurement conditions.
This section uses the example of setting a peak hold as the hold condition to explain
how to set measurement conditions.
Moving to FUN mode and HOLD
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
[HOLD] on the main display.
Setting Hold Conditions
3.
Press the UP or DOWN Key.
The sub-display will flash.
4.
Use the UP and DOWN Keys to select [P-H].
Press either the LEFT or RIGHT Key to cancel the
selected option.
The display will return to the current setting (OFF in this
example).
5.
Press the ENT Key to confirm the setting.
The setting will be registered.
Section 3
BASIC OPERATION
LD ON ZERO ENABLE
(mm)
SUB
SUB
SUB
ZX-L-N
User's Manual
37