Omron L User Manual page 138

Moving to FUN and SPCL
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
[SPCL] on the main display.
Moving to ZRMEM
3.
Press the UP or DOWN Key.
The sub-display will flash.
4.
Use the UP and DOWN Keys to display
[ETC] or [ALL].
5.
Press the ENT Key.
6.
Use the LEFT and RIGHT Keys to display
[ZRMEM] on the main display.
Selecting Whether or Not to Enable Zero Reset Memory
7.
Press the UP or DOWN Key.
The sub-display will flash.
8.
Select either [ON] or [OFF].
ON: Zero reset memory enabled
OFF: Zero reset memory disabled (default)
9.
Press the ENT Key to confirm the settings.
The setting will be registered.
Section 6
AUXILIARY FUNCTIONS
LD ON ZERO ENABLE
SUB
SUB
SUB
LD ON ZERO ENABLE
SUB
SUB
SUB
ZX-L-N
User's Manual
(mm)
(mm)
121