Installing The Amplifier Unit - Omron L User Manual

Section 2
PREPARATION FOR MEASUREMENT

Installing the Amplifier Unit

Amplifier Units can be easily mounted to 35-mm DIN Track.
Installation
Hook the connector end of the Amplifier Unit on the DIN Track and press in at the
bottom until the Unit locks into place.
Always hook the connector end of the Amplifier Unit on the DIN Track first. Mounting strength may
decrease if the output cable end is hooked on the DIN Track first.
ZX-L-N
16
User's Manual
DIN Track (Option)
PFP-100N (1m)
PFP-50N (0.5m)
PFP-100N2 (1m)
End Plate (Option)
PFP-M
Hook on the
connector end