Omron L User Manual page 86

One-point Scaling
Measurement is performed at one position and offset values are set for that
measurement.
The offset and increment/decrement inversion (display inversion) can be set.
This section describes how to set one-point scaling, using an example of correcting
display values to match actual distances.
Example: Displaying the Height of the Sensing Object
Sensor head
Sensing
object
Moving to FUN Mode and SCALE
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
[SCALE] on the main display.
Executing Scaling
3.
Press the UP or DOWN Key.
The sub-display will flash.
4.
Use the UP and DOWN Keys to display [ON].
Displayed value
(mm)
Actual measured
50
value
40
40mm
Value to be
displayed
50mm
Section 5
DETAILED SETTINGS
Actual measured
value
40
(mm)
LD ON ZERO ENABLE
SUB
SUB
User's Manual
(mm)
ZX-L-N
69