Omron L User Manual page 160

Power supply voltage
Current consumption
Connectable Amplifier Units
No. of Amplifier Units
connectable
Communicatio Communications
ns functions port
Protocol
Baud rate
Data
configuration
Indicators
Protection circuits
Ambient temperature
Ambient humidity
Dialectic strength
Insulation resistance
Case materials
Weight (packed state)
12 to 24 VDC ±10%, Ripple (p-p) 10% max.
Supplied from Amplifier Unit
Power supply voltage: 12 V, Current consumption: 60 mA max.
(Excluding Amplifier Unit current consumption and output current.)
ZX Series
Up to 5 (Two Calculating Units max.)
RS-232C port (9-pin D-sub connector)
CompoWay/F
38,400 bps
Data bits: 8, Parity: None, Start bits: 1
Stop bits: 1, Flow control: None
Power ON (green), Communicating with Sensor (green), Sensor
communications error (red)
Communicating with external terminal (green), External terminal
communications error (red)
Reverse power supply wiring protection
Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)
Operating and storage: 35% to 85% (with no condensation)
1,000 VAC, 50/60 Hz for 1 min
20MΩ min. (at 500 VDC)
Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Approx. 350 g
Section 7
APPENDIX
ZX-L-N
143
User's Manual