Omron L User Manual page 96

Selecting Trigger Types
1.
Use the LEFT and RIGHT Keys to display
[H-TRG] on the main display.
[H-TRG] will not be displayed if the delay conditions are
set to OFF.
2.
Press the UP or DOWN Key.
The sub-display will flash.
3.
Use the UP or DOWN Key to select the
desired trigger type.
4.
Press the ENT Key to confirm the setting.
The selected trigger type will be registered.
Setting Trigger Levels (when UP or DOWN Is Selected)
5.
Use the RIGHT or LEFT Key to display
[H-LVL] on the main display.
[H-LVL] will not be displayed if timing input [TIMIG] is set
as the trigger.
6.
Press the UP or DOWN Key.
The leftmost digit of the sub-display will flash.
7.
Use the Cursor Keys to set the desired trigger
level.
8.
Press the ENT Key to confirm the setting.
The trigger level will be registered.
Section 5
DETAILED SETTINGS
LD ON ZERO ENABLE
(mm)
SUB
SUB
SUB
LD ON ZERO ENABLE
(mm)
SUB
Moves from one digit to
another.
Changes the current value.
SUB
ZX-L-N
User's Manual
79