Measuring The Received Light Amount (Intensity Mode) - Omron L User Manual

Section 3
BASIC OPERATION
Measuring the Received Light Amount
(Intensity Mode)
This function can be used only when the sensor head is the Reflective type.
In the intensity mode, the received amount of light returning from the object can be displayed
in the main display.
The intensity mode can be used when you want to detect changes in the color or material of
the object. In the intensity mode, distance measurement is not possible.
• With the intensity mode, all processing, including 2-sensor operation, hold, threshold judgement and linear
outputs, will be performed on the received light amount.
• To use intensity mode, intensity mode must be set first. When intensity mode is set, some settings (e.g.
monitor focusing) are initialized.
• To use intensity mode, the measurement gain must be fixed to an option other than AUTO.
Moving to FUN Mode and SPCL
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
[SPCL] on the main display.
Moving to INTN
3.
Press the UP or DOWN Key.
The sub-display will flash.
4.
Use the UP and DOWN Keys to display [SET]
or [ALL].
5.
Press the ENT Key.
6.
Use the LEFT and RIGHT Keys to display
[INTN] on the main display.
ZX-L-N
46
User's Manual
Setting the Measurement Sensitivity (Gain Switching) p.74
LD ON ZERO ENABLE
(mm)
SUB
SUB
SUB
LD ON ZERO ENABLE
(mm)