Section 2
PREPARATION FOR MEASUREMENT
Interface Units
Use an Interface Unit to connect a personal computer to the Smart Sensor system.
Connection Method
1.
Open the connector cover on the Amplifier Unit.
Open the connector cover by lifting and sliding it open.
2.
Mount the Interface Unit to the DIN Track.
3.
Slide and connect the Interface Unit to the Amplifier Unit connector.
To disconnect the Interface Unit, perform the above operations in reverse order.
• When multiple Amplifier Units are used, connect the Interface Unit to the Amplifier Unit with the
• Communication with the Smart Monitor is possible via the Interface Unit.
ZX-L-N
26
User's Manual
2
highest channel number.
p.144
1
3