Safety Instructions - YASKAWA iC9200 Series Operating Manual

General

Safety instructions

Use of this manual
Applicable documentation
Warranty conditions
1.3 Safety instructions
Intended use
Documentation
10
This safety manual contains information for the intended use of the iC9200 Series CPUs.
Knowledge of regulations and the proper technical implementation of the safety instruc-
tions detailed in this manual performed by qualified personnel are prerequisites for safely
planning, engineering, programming, installing and starting up the iC9200 Series CPUs
as well as for ensuring safety during their operation and maintenance.
personnel'...page 13
Yaskawa will not be held liable for severe personal injuries, damage to property or the
surroundings caused by any of the following: unqualified personnel working on or with
the devices, de-activation or bypassing of safety functions, or failure to comply with the
instructions detailed in this manual.
The safety components and systems have been developed, manufactured and tested in
compliance with the pertinent safety standards and regulations. They may only be used
for the intended applications under the specified environmental conditions.
They must be used only as specified in environmental descriptions and be connected
only to approved external devices.
The manual contains safety instructions, description of the modules and information
about life cycle.
In the safety CPUs components of other manufacturers are possibly integrated. For
these purchased parts of the respective manufacturers risk evaluations were carried out.
The conformity of the constructions to the valid European and national regulations was
declared by the according manufacturer.
The warranty conditions can be found in the "General terms and conditions" at
⮫ www.yaskawa.eu.com.
WARNING
Danger by non intended use!
Any other use beyond the intended use and/or other use of this product can
lead to dangerous situations and is prohibited.
The CPU iC921xM-x is constructed and produced for:
■
industrial use.
■
general control and automation tasks.
■
industrial network communication, machine and process control.
■
the connection to EtherCAT and PROFINET (optional).
■
the installation in a control cabinet with degree of protection IP54 or better.
■
operation within the environmental conditions specified in the technical data.
DANGER
This device is not certified for applications:
−
in explosive environments (EX-zone)
The manual must be available for:
■
Project design department
■
Installation department
■
Commissioning
■
Operation
⮫ 'Education of the
HB700 | CPU | PMC921xEx | en | 24-04
iC9200 Series