Table of Contents
Advertisement
General
Personal protective equipment
Operating personnel
Qualified personnel
1.9
Personal protective equipment
General
Work clothing
Protective helmet
Safety shoes
Protective gloves
14
The automation system may only be operated by persons, which are trained, instructed
and authorized. Troubleshooting, maintenance, cleaning, maintenance and replacement
must be performed only by skilled or trained personnel. These persons have to know the
instruction manual and have to act accordingly. Commissioning and training should only
be performed by qualified personnel.
These are electrical engineers and electricians of the customer or third party, which are
authorized by the manufacturer and which have learned installation and commissioning
by the manufacturer and are allowed to ground, mark and install electrical circuits and
devices in accordance to the standard safety technology. Qualified personnel is trained
and instructed according to the corresponding valid standards in safety technology in the
care and use of appropriate safety equipment.
During work, the wearing of personal protective equipment is needed to minimize health
hazards.
■
Always wear the necessary protective equipment for the corresponding job.
■
For your own safety regard the signs, which are in your work space.
is close-fitting clothing with low tensile strength, with tight sleeves and without a pro-
truding part. Depending on the application it should be prevented, that the carrier gets
serious injured or is exposed to health risk during work. For reasons of injury no jewellery
like rings and chains should be worn.
for protection against falling and flying objects.
for protection against falling heavy objects.
to protect hands from friction abrasions, punctures or injuries, as well as from contact with
hot objects.
HB700 | CPU | PMC921xEx | en | 24-04
iC9200 Series
Advertisement
Table of Contents
