Table of Contents
Advertisement
iC9200 Series
C Checklist commissioning, parametrization and validation
Checklist
Run.
Requirement
No.
3
Commissioning
3.1
Is guaranteed that all safe communication participants
of a system have a clear safe device address (F-
address)?
This is valid also for participants, which belong to dif-
ferent safety controllers, if the controllers are connected
by gateways (e.g. Ethernet).
3.2
Was the cycle time T
and adjusted in the safety CPU?
safety CPU'...page 134
3.3
Was the maximum response time with the adjusted
cycle time T
CI
times'...page 131
3.4
Were the device parameters of the safety I/O modules
validated?
⮫ 'Validation of the system'...page 121
3.5
Was the correct project selected?
3.6
Was a review of the safety programme done?
3.7
Were the project data copied on a memory card?
3.8
Was a complete functional test accomplished and docu-
mented?
3.9
Was your engineering project documented and
archived legally compliant?
3.10
Was the service personnel instructed into the handling
of the control system?
Date:.........................Name: ...................................Sign: ......................................................
HB700 | CPU | PMC921xEx | en | 24-04
of the safety CPU determined
CI
⮫ 'Cycle time T
proofed by calculation?
Checklist commissioning, parametrization and validation
fulfilled
yes
CL
⮫ 'Response
Notes
no
217
Advertisement
Table of Contents
