YASKAWA iC9200 Series Operating Manual page 91

iC9200 Series
4.5.2.1 Assigning new IP address parameters
Assignment via WBM
HB700 | CPU | PMC921xEx | en | 24-04
2. Set the interface 'LAN (X3/X4)' and click on
LAN (X3/X4)
�� A connection between iCube Engineer and your CPU is established, by means
of the IP address parameters, and the login dialog for authentication is opened.
3. Enter your login details and click on
On delivery, the following access data are preset with administrator
rights:
−
Username: admin
−
The password is printed under the front flap on the front of the
CPU.
�� Now you can access your CPU. An existing connection is shown in the Plant
area at the node of the CPU by
As soon as you are online connected to the CPU, you can assign new IP address
parameters to it via WBM (Web-based management).
Deployment CPU iC921xM-EC
Commissioning > Online access to the CPU
.
.
.
91