Create A New Project - YASKAWA iC9200 Series Operating Manual

Deployment CPU iC921xM-FSoE
Programming and file system > Create a new project
'Plant' area
Editor area
Cross-functional area
Status bar
5.4.3

Create a new project

Proceeding
112
In the 'Plant' area, you map all the physical and logical components of your application as
a hierarchical tree structure.
■
Double-clicking on a node in the 'Plant' area or on an element in the 'Components'
area opens the associated editor group in the editor area.
■
Editor groups are always shown in the center of the user interface.
■
Each editor group contains several editors, which can be opened and closed using
buttons in the editor group.
■
You can identify the corresponding editor based on the color representation of the
editor group:
–
Blue: Editor from the area 'Plant'.
–
Orange: Editor from the area 'Components'.
The cross-functional area contains functions that extend across your entire project.
■
ERROR LIST
–
All errors, warnings and messages of the current project are shown here.
■
GLOBAL FIND AND REPLACE
–
Here you can find and replace text in the project.
■
CROSS REFERENCES
–
All cross references within the project are shown here, such as the use and decla-
ration of all variable types.
■
WATCH WINDOW
–
Debug tool - the current values of the added variables are shown here in online
mode.
■
BREAKPOINTS
–
Debug tool - here you can set and reset breakpoints for troubleshooting.
■
CALL STACKS
–
Debug tool - the sequence of calls when the code is executed is shown here and
commands for debugging with breakpoints are made available.
■
LOGIC ANALYSIS
–
Here variable values can be recorded and visualized during runtime.
■
PROTOCOL
–
All errors, warnings and messages are output here.
'Online': Messages from the runtime environment as well as other errors and warn-
ings relating to online communication.
–
'Engineering': Non-project-related messages about events that affect the software
such as device files GSDML etc.
■
RECYCLE BIN
–
Items that you have recently deleted from the 'Plant' or 'Components' areas are
moved to the recycle bin.
–
If necessary, you can restore deleted items.
Detected errors and warnings are shown here. In addition, you have a zoom function
here for graphical applications.
NOTICE
The parametrization of the safety parameters is secured by a safety pass-
word, which you must assign when creating a project with safety components.
Ensure that the safety password is appropriately protected and only pass on
the safety password to authorised personnel!
1. Start iCube Engineer.
HB700 | CPU | PMC921xEx | en | 24-04
iC9200 Series