E Checklist Modification And Retrofitting - YASKAWA iC9200 Series Operating Manual

iC9200 Series
E Checklist modification and retrofitting
Checklist
Run. Requirement
No.
5 Modification and retrofitting
5.1 Is the modification/retrofitting compatible? Are the
requirements of the checklists of planning, installation,
commissioning and validation further fulfilled?
⮫ 'Checklist planning'...page 215
⮫ 'Checklist installation'...page 216
⮫ 'Checklist commissioning, parametrization and vali-
dation'...page 217
5.2 Was the safety component to be replaced exchanged
for a compatible safety component?
5.3 If non-safety components are changed, is the
checksum unchanged?
5.4 Was the correct security project loaded?
5.5 Are the calculated reaction times further kept after mod-
ification/retrofitting? Proof necessary!
5.6 Were the project data copied on a memory card?
5.7 Was a complete functional test accomplished and docu-
mented?
Date:.........................Name: ...................................Sign: ......................................................
HB700 | CPU | PMC921xEx | en | 24-04
Checklist modification and retrofitting
fulfilled Notes
yes no
219