Basics and mounting
System conception > Components
2.2
System conception
2.2.1
Overview
2.2.2
Components
CPU iC921xM-x
24
The iC9200 Series is a modular automation system for assembly on a 35mm mounting
rail. Due to the compatibility to the System SLIO from Yaskawa you can adapt this system
exactly to your automation tasks by using the System SLIO periphery modules in 2-, 4-,
8- and 16-channel versions. An additional PCIe bus makes the system future-proof for
future expansions.
More detailed information about the usage of the System SLIO modules
may be found in the according manual in the 'Download Center' of
www.yaskawa.eu.com under the corresponding order number.
■
CPU (head module)
■
Power modules
■
8x periphery modules
■
16x periphery modules
■
Accessories
CAUTION
Only modules of Yaskawa may be combined. A mixed operation with third-
party modules is not allowed!
With the CPU iC921xM-x CPU electronics and power supply are integrated in one
housing. The CPU is programmed and configured with iCube Engineer from Yaskawa in
IEC 61131-3 . The CPU has a PCIe bus on the left for future expansions. On the right
side via the SliceBus you can connect System SLIO periphery modules from Yaskawa.
As head module via the integrated power module for power supply CPU electronic as well
as the electronic of the periphery modules, which are connected via the SliceBus. For the
connection of the power supply the CPU has a removable connector. To supply the power
section of the connected periphery modules, you must always plug in the power module
007-1AB00 - DC 24V 10A directly after the CPU.
HB700 | CPU | PMC921xEx | en | 24-04
iC9200 Series