YASKAWA iC9200 Series Operating Manual page 195

iC9200 Series
Configuration
Tab: Basic Configuration
HB700 | CPU | PMC921xEx | en | 24-04
1. Activate the 'Activation' selection field.
2. Click on [Apply].
�� The firewall is enabled and remains enabled even after a restart.
Permanent disabling
1. Disable the 'Activation' selection field.
2. Click on [Apply].
�� The firewall is disabled and remains disabled even after a restart.
By disabling the firewall you endanger the security of your
system, especially if it can be reached via the Internet! The
firewall should only temporarily be disabled for testing purposes
such as troubleshooting.
The configuration of the firewall rules is divided into the following tabs:
■
Basic Configuration
–
Here you will find predefined firewall rules which you can enable or disable.
■
User Configuration
–
Here you can create, enable or disable your own firewall rules according to defined
specifications.
There is a 'Action' column in both tabs. The firewall settings are applied with the [Apply]
button. There are the following setting options for the 'Action' column:
■
Accept
–
The corresponding connection and connection request is accepted.
–
The corresponding connection can be established.
■
Drop
–
The corresponding connection is interrupted.
–
There is no answer to the corresponding request.
–
The corresponding package is discarded.
■
Reject
–
The corresponding connection is rejected.
–
The sender receives a response to the corresponding request.
■
Continue
–
The rule is not executed.
–
This can be used e.g., to skip a rule in the 'Basic Configuration' and instead create
a rule in the 'User Configuration' and enable it there.
'ICMP Configurations'
■
'Incoming ICMP requests accepted'
–
enabled: Incoming ICMP echo requests are accepted. The CPU can be reached
with a ping request.
–
disabled: Incoming ICMP echo requests are blocked. The CPU can not be reached
with a ping request.
■
'Outgoing ICMP requests accepted'
–
enabled: Outgoing ICMP echo requests are accepted. Ping requests from the CPU
are transmitted.
–
disabled: Outgoing ICMP echo requests are blocked. Ping requests from the CPU
are blocked.
Web-based management - WBM
Security > Firewall
195