Slot For Yaskawa Sd Card - YASKAWA iC9200 Series Operating Manual

Hide thumbs Also See for iC9200 Series:
Table of Contents

Advertisement

iC9200 Series
4.6.2

Slot for Yaskawa SD card

0
1
Power
CPU
FS
CPU
FS
0
1
Power
CPU
FS
FS
CPU
FS
HB700 | CPU | PMC921xEx | en | 24-04
You can only insert a Yaskawa SD card with a valid license file in this slot.
In the WBM at 'Security �� SD Card', you can enable or disable the use of the SD card
and call up information about it. By default, the use of the SD card is enabled.
Card'...page 197
An inserted Yaskawa SD card is only recognized by the CPU after PowerON.
If a new, unused Yaskawa SD card is detected after PowerON, the overlay file system
with user program, configurations, user data and firmware adjustments, is moved
FS
from the internal parametrization memory to the Yaskawa SD card and deleted in
the internal parametrization memory. The CPU uses the overlay file system on the
Yaskawa SD card, now.
If, after PowerON, an Yaskawa SD card is recognized on which there is already an
overlay file system
FS
memory without being moved. The CPU uses the existing overlay file system on the
Yaskawa SD card, now.
WARNING
Data loss - card removal only when the power supply is switched off!
Only remove the Yaskawa SD card when the power supply of the CPU is
switched off. Otherwise this will lead to data loss!
General notes on using the Yaskawa SD card
Only Yaskawa SD cards are supported.
The cards are pre-formatted (ext4 format) for use in CPUs of the
iC9200 Series.
When formatting again, certain information on the Yaskawa SD card
that is required for use in the CPUs of the iC9200 Series will be lost.
Exclude the Yaskawa SD card from being formatted.
The Yaskawa SD card can be read at any time with a conventional
SD card reader. Sensitive data on the Yaskawa SD card can be read
if you do not physically protect it from unauthorized access.
Make sure that unauthorized persons cannot access the Yaskawa SD
card.
Memory management > Slot for Yaskawa SD card
, the overlay file system is deleted in the internal parametrization
Deployment CPU iC921xM-EC
⮫ 'SD
95

Advertisement

Table of Contents
loading

Table of Contents