Table of Contents
Advertisement
User's Manual
Remote
Control
Highlight Remote Control in the Devices menu and press the
setup screen allows you to select a port and make correct settings for a remote keyboard.
Figure 36 ─ Remote Control setup screen.
Recording Setup
Record
Highlight Record in the Record menu and press the
appears.
36
Highlighting OK and pressing the
Figure 37 ─ Record menu.
button applies resolution changes.
button. The Remote Control
Highlight the box beside Port and select
between None, RS232 and RS485. If the RS232
port and RS485 port is in use for PTZ control,
networking or text input, the remote keyboard
cannot be configured.
Highlight Setup... and select the correct Baud
Rate, Parity, Data Bits and Stop Bits for the
device you are connecting to the DVR.
Highlight the box beside Remote Control
Product and select the device from the list.
button. The Record setup screen
Advertisement
Table of Contents
