Electrical Specification Verification - GE LOGIQ Totus Basic Service Manual

Direction 5936427, Rev. 1
3-5-3

Electrical specification verification

CONNECTING A LOGIQ TOTUS TO THE WRONG VOLTAGE LEVEL WILL MOST LIKELY
CAUTION
DESTROY IT.
Verification of the LOGIQ Totus voltage setting
Verify that the mains voltage specified for the LOGIQ Totus is available on-site.
The voltage setting for the LOGIQ Totus is found on the rating label on the back of the LOGIQ Totus on
the lower rear frame.
Figure 3-5 Rating Label - LOGIQ Totus
3 - 14
GE HealthCare CONFIDENTIAL
Section 3-5 - Completing the Setup
LOGIQ Totus Basic Service Manual