GE LOGIQ Totus Basic Service Manual page 538

D 5936427, R
IRECTION EV
6. Disconnect the UVNAV PWR Cable from the VNAV
Assy.
7. Cut the cable tie.
8. Unscrew 3 screws to remove the T2 VNAV FIX BRKT
from the VNAV.
9. Disconnect the UCO To V-NAV Signal Cable to the
VNAV.
8-11-19-3 Installation Procedure
1.) Parts to be installed in reverse order of removal
2.) Perform "Functional Checks after FRU replacement (Debrief Guideline)" as described in
12 on page 8-223
8 - 212
GE HealthCare CONFIDENTIAL
. 1
Steps
Section 8-11 - Replacing Options
LOGIQ T
OTUS
Corresponding Graphic
Basic Service Manual
Section 8-