1. Manuals
  2. Brands
  3. GE Manuals
  4. Medical Equipment
  5. LOGIQ 100 PRO
  6. Technical publication

GE LOGIQ 100 PRO Technical Publication

Hide thumbs
Table of Contents

Advertisement

Quick Links

Technical
Publication
Direction 5305880-100
Revision 3
GE Healthcare
LOGIQ™ 100 PRO Service Manual
©
Copyrighted
1995-2008 by General Electric Co.
All Rights Reserved.
Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 2 o f 1 9 7
GE Healthcare

Advertisement

Table of Contents
loading

Related Manuals for GE LOGIQ 100 PRO

Summary of Contents for GE LOGIQ 100 PRO

  • Page 1 GE Healthcare Technical Publication Direction 5305880-100 Revision 3 GE Healthcare LOGIQ™ 100 PRO Service Manual © Copyrighted 1995-2008 by General Electric Co. All Rights Reserved. Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 2 o f 1 9 7...
  • Page 2 GE H EALTHCARE 5305880-100 , R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Your Notes: Page i-ii Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 3 o f 1 9 7...
  • Page 3 • WIRD DIESE WARNUNG NICHT BEACHTET, SO KANN ES ZU VERLETZUNGEN DES KUNDENDIENSTTECHNIKERS, DES BEDIENERS ODER DES PATIENTEN DURCH ELEKTRISCHE SCHLÄGE, MECHANISCHE ODER SONSTIGE GEFAHREN KOMMEN. Page i-i Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 4 o f 1 9 7...
  • Page 4 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL • ESTE MANUAL DE SERVICIO SÓLO EXISTE EN INGLÉS. AVISO • SI ALGÚN PROVEEDOR DE SERVICIOS AJENO A GEMS SOLICITA UN IDIOMA QUE NO SEA EL INGLÉS, ES RESPONSABILIDAD DEL CLIENTE OFRECER UN SERVICIO DE TRADUCCIÓN.
  • Page 5 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page i-iii Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 6 o f 1 9 7...
  • Page 6 GE Medical Systems personnel. In performing all electrical work on these products, GE will use its own specially trained filed engineers. All of GE’s electrical work on these products will comply with the requirements of the applicable electrical codes.
  • Page 7 The contents of this publication may not be copied or duplicated in any form, in whole or in part, without prior written permission of GE Medical Systems. GE Medical Systems may revise this publication from time to time without written notice. TRADEMARKS All products and their name brands are trademarks of their respective holders.
  • Page 8 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page i-vi Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 9 o f 1 9 7...
  • Page 9 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Revision History Revision Date Reason for change Preliminary Release. JAN 26 2008 Changes incorporated for correcting the SPR’s raised against DOC0421436. APRIL 24 2008 Changes incorporated on contact details and added additional information based on service August 4 2008 teams requirements.
  • Page 10 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page i-vi Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 1 o f 1 9 7...

  • Page 11: Table Of Contents

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Table Of Contents Chapter Table Of Contents Chapter 1 Introduction Section 1-1Overview ..................1-1 1-1-1 Overview ........................1-1 1-1-2 Purpose of Chapter 1..................... 1-1 1-1-3 Purpose of Service Manual.................... 1-1 1-1-4 Typical Users of the Basic Service Manual ...............
  • Page 12 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Lighting 2 2-2-2 Electrical Requirements ....................2-2 2-2-2-1 LOGIQ™ 100 PRO Power Requirements ............2-2 2-2-2-2 Site Circuit Breaker ................... 2-2 2-2-2-3 Site Power Outlets..................... 2-2 2-2-2-4 Unit Power Plug....................2-2 2-2-2-5 Power Stability Requirements ................
  • Page 13 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 3-7Paperwork................... 3-28 3-7-1 User Manual(s) ......................3-29 3-7-2 Product Locator Card....................3-29 Chapter 4 ..................Functional Checks Section 4-1 ..................Overview 4-1 4-1-1 Purpose of Chapter 4..................... 4-1 Section 4-2 General Procedures ..............
  • Page 14 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 7 Diagnostics/Troubleshooting Section 7-1Overview..................7-1 7-1-1 Purpose of Chapter 7 ..................... 7-1 Section 7-2 Power On Diagnostics ..............7-3 7-2-1 DAVINCI Board Tests 7-4 7-2-2 FEB Test for LOGIQ™ 100 PRO .................. 7-7...
  • Page 15 Section 10-3 Periodic Maintenance Schedule ..........10-2 10-3-1 How often should PMs be performed? ................ 10-2 Section 10-4 Tools Required ............... 10-4 10-4-1 Standard GE Tool Kit....................10-4 10-4-2 Special Tools, Supplies and Equipment ..............10-6 10-4-2-1Specific Requirements for Periodic Maintenance .......... 10-6 Section 10-5 System Periodic Maintenance ..........
  • Page 16 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-6 Probe Leakage Current Test 10-19 10-6-6-1Definition....................... 10-19 10-6-6-2Generic Procedure for Leakage current ............10-19 10-6-6-3Meter Procedure Using Dale Meter to measure leakage current ....10-19 Meter Procedure using Probe Adapter to measure Probe isolation(Sink) Current 21 Section 10-7 When There's Too Much Leakage Current......

  • Page 17: Chapter 1 Introduction

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 1 Introduction Section 1-1Overview 1-1-1 Overview The LOGIQ™ 100 PRO is a compact portable ultrasound scanner which is designed for OB/GYN, Abdomen, Urology and small part Scans using the convex, linear and micro-convex (Transvaginal) probes.

  • Page 18: Typical Users Of The Basic Service Manual

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9.) Chapter 9, Replacement Parts: Contains a complete list of replacement parts for the LOGIQ™ 100 PRO. 10.)Chapter 10, Quality Assurance: Provides periodic maintenance procedures for the LOGIQ™...

  • Page 19: Section 1-2 Safety

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 1-2 Safety 1-2-1 Warnings CAREFULLY READ ALL THE WARNINGS BELOW WARNING 1.) The operator manual should be read and understood before operating the LOGIQ™ 100 PRO and kept nearby for quick reference.

  • Page 20: Section 1-3 Important Conventions

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 1-3 Important Conventions 1-3-1 Conventions Used in Book Model Designations. This manual covers the LOGIQ™ 100 PRO scanners. (See “LOGIQ™ 100 PRO Models Covered by this Manual” on page 1-2.) Icons.

  • Page 21: Standard Hazard Icons

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-3-2 Standard Hazard Icons Important information will always be preceded by the exclamation point contained within a triangle, as seen throughout this chapter. In addition to text, several different graphical icons (symbols) may be used to make you aware of specific types of hazards that could cause harm.

  • Page 22: Product Icons

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-3-3 Product Icons The following table describes the purpose and location of safety labels and other important information provided on the equipment. LABEL/SYMBOL PURPOSE/MEANING LOCATION Identification and Rating Plate...
  • Page 23 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL LABEL/SYMBOL PURPOSE/MEANING LOCATION "CAUTION" The equilateral Various triangle is usually used in combination with other symbols to advise or warn the user. ATTENTION - Consult Various accompanying documents " is...
  • Page 24 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL LABEL/SYMBOL PURPOSE/MEANING LOCATION "Equipotentiality" Indicates Rear of console the terminal to be used for connecting equipotential conductors when interconnecting (grounding) with other equipment. "Non-Ionizing Radiation" Rear of console near power...
  • Page 25 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL LABEL/SYMBOL PURPOSE/MEANING LOCATION No hazardous substance, Rear Panel. above the maximum concentration value, are present. Maximum concentration values for electronic information products, as set by the People’s Republic of China...

  • Page 26: Section 1-4Safety Considerations

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 1-4Safety Considerations 1-4-1 Introduction The following safety precautions must be observed during all phases of operation, service and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual, violates safety standards of design, manufacture and intended use of the equipment.

  • Page 27: Mechanical Safety

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-4-3 Mechanical Safety ULTRASOUND PROBES ARE HIGHLY SENSITIVE MEDICAL INSTRUMENTS THAT CAN EASILY BE DAMAGED BY IMPROPER HANDLING. USE CARE WHEN HANDLING AND PROTECT FROM DAMAGE WHEN NOT IN USE. DO NOT USE A DAMAGED OR WARNING DEFECTIVE PROBE.

  • Page 28: Labels Locations

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-4-5 Labels Locations GHOST Label Figure 1-1 Warning Lables Page 1-12 Section 1-1 - Overview Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 2 9 o f 1 9 7...
  • Page 29 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-3-5 Labels Locations (cont’d) Figure 1-2 Warning Lables Chapter 1 - Introduction Page 1-13 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 3 0 o f 1 9 7...
  • Page 30 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-3-5 Labels Locations (cont’d) Figure 1-3 Warning Labels Page 1-14 Section 1-1 - Overview Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 3 1 o f 1 9 7...
  • Page 31 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-3-5 Labels Locations (cont’d) Figure 1-4 Warning Labels Chapter 1 - Introduction Page 1-15 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 3 2 o f 1 9 7...
  • Page 32 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-3-5 Labels Locations (cont’d) CUIDADO ATTENZIONE CAUTION Não utilize os dispositivos seguintes per- Non usare i seguenti apparecchi in pros- to deste equipamento: simità di questa apparecchiatura:...
  • Page 33 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-3-5 Labels Locations (cont’d) Figure 1-6 Warning Lables Chapter 1 - Introduction Page 1-17 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 3 4 o f 1 9 7...

  • Page 34: Dangerous Procedure Warnings

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-4-6 Dangerous Procedure Warnings Warnings, such as the example below, precede potentially dangerous procedures throughout this manual. Instructions contained in the warnings must be followed. DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT IN THIS EQUIPMENT.

  • Page 35: Emc, Emi, And Esd

    3.) Keep the equipment as far as possible from other electronic equipment. 4.) Be sure to use the only cables provided by GEMS or ones approved by Wipro GE. Install the unit/peripherals as per the installation procedure provided in Chapter 3 - INSTALLATION. The layout of the LOGIQ™...

  • Page 36: General Notice

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1-5-5 General Notice 1.) Designation of Peripheral Equipment Connectable to this Product. The peripheral which conforms to EN60601-1-2 (IEC601-1-2), can be connected up to the LOGIQ™ 100 PRO without compromising its EMC performance.

  • Page 37: Electrostatic Discharge (Esd) Prevention

    Operator's Manual, please contact your service support center. If the service engineer needs additional information to repair this equip ment, please contact any relevant addresses given below: 1-6-1 System Manufacturer WIPRO GE HEALTHCARE - INDIA WIPRO GE HEALTHCARE PVT., LTD. ULTRASOUND GROUP. PLOT # 4, KADUGODI INDUSTRIAL AREA,...

  • Page 38: Contact Information

    4855 W. Electric Avenue TEL: (1) 262-524-5698 Milwaukee, WI 53219 FAX: +1- 414-647-4125 Customer Answer Center ASIA(Singapore/Japan): TEL: 65-291 8528 GE Ultrasound Asia (Singapore) (81) 426-48-2950 Service Department - Ultrasound 298 Tiong Bahru Road #15-01/06 FAX: 65-272-3997 Central Plaza FAX: (81) 426-482902...

  • Page 39: Chapter 2 Pre Installation

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 2 Pre Installation Section 2-1Overview 2-1-1 Purpose of Chapter 2 This chapter provides the information required to plan and prepare for the installation of a LOGIQ™ 100 PRO. Included are descriptions of the facility and electrical needs to be met by the purchaser of the unit.

  • Page 40: Lighting

    2-2-2-4 Unit Power Plug If the unit arrives without a power plug, or with the wrong plug, you must contact your GE dealer or the installation engineer must supply what is locally required. 2-2-2-5 Power Stability Requirements Voltage drop-out Max 10 ms.

  • Page 41: Emi Limitations

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 2-2-3 EMI Limitations Ultrasound machines are susceptible to Electromagnetic Interference (EMI) from radio frequencies, magnetic fields, and transients in the air or wiring. They also generate EMI. The LOGIQ™ 100 PRO complies with limits as stated on the EMC label.

  • Page 42: Probes Environmental Requirements

    RF leakage. Or, if a label has been found in such a touch metal position, move the label. Use GE specified The interconnect cables are grounded and require ferrite beads and other harnesses and shielding. Also, cable length, material, and routing are all important; do peripherals not change from what is specified.

  • Page 43: Time And Manpower Requirements

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 2-2-5 Time and Manpower Requirements Site preparation takes time. Begin Pre installation checks as soon as possible, if possible, six weeks before delivery, to allow enough time to make any changes.
  • Page 44 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Your Notes: Page 2-6 Section 2-2 - General Console Requirements Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 4 5 o f 1 9 7...

  • Page 45: Chapter 3 Installation

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 3 Installation Section 3-1Overview 3-1-1 Purpose of Chapter 3 This chapter contains information needed to install the unit. Included are references to a procedure that describes how to receive and unpack the equipment and how to file a damage or loss claim.

  • Page 46: Safety Reminders

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-1-3 Safety Reminders WHEN USING ANY TEST INSTRUMENT THAT IS CAPABLE OF OPENING THE AC GROUND LINE (I.E., METER’S GROUND SWITCH IS OPEN), DON’T TOUCH DANGER THE UNIT! If the unit is very cold or hot, do not turn on its power until it has had a chance to acclimate to its operating environment.

  • Page 47: Section 3-2 Receiving And Unpacking The Equipment

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 3-2 Receiving and Unpacking the Equipment Please read that procedure before packing/unpacking the LOGIQ™ 100 PRO. We strongly advice you to store the LOGIQ™ 100 PRO packing material in undamaged condition in case of future transportation.
  • Page 48 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Packaging Buffe Carton Flaps Packaging Buffers Stretch Film Figure 3-2 Unpacking LOGIQ™ 100 PRO Note: The Service Manual, Operator Manual,Advanced Refernce Manual, Gel Bottle and Power Cord are wrapped in bubble sheet and are kept along the sides of the corrugated carton box.

  • Page 49: Section 3-3 Preparing For Installation

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 3-3 Preparing for Installation 3-3-1 Physical Inspection 3-3-1-1 Systems Voltage Settings • Verify that the scanner is set to the correct voltage. The Voltage settings for the LOGIQ™ 100 PRO Scanner is found on a label on the rear of the system.

  • Page 50: Section 3-5 Completing The Installation

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Assembling LOGIQ™ 100 PRO (Contd.,) Figure 3-4 Assembling LOGIQ™ 100 PRO Section 3-5 Completing the Installation 3-5-1 Transducer Connection 1.) Connect a transducer to transducer receptacle as follows,Refer to fig 3-4 A.) Ensure that the transducer twist lock lever points towards the top of the probe...

  • Page 51: Installation Of Optional Accessories

    Video Out on the rear panel of LOGIQ™ 100 PRO to the Video IN of the VGP. Connect the shutter cable from the VGP printer to the rear panel of the Logiq 100 PRO. 4.) The images and report pages of the Logiq 100 PRO can be printed on HP Laser jet printer(Model HP1020) through the USB port provided on the rear panel.Images can be...
  • Page 52 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Figure 3-5 Installation of Accessories Page 3-8 Section 3-5 - Completing the Installation Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 5 3 o f 1 9 7...

  • Page 53: Installation Of Two Probe Adapter & Logiq A200 Probe Adapter (Optional)

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Installation of Two Probe Adapter & LOGIQ α200 Probe Adapter (Optional) 3-5-3 1.) Remove the adhesive tape to open the flaps of two probe port or LOGIQ α 200 Probe Adapter 2.) Remove the PU Foams inside the two probe port or LOGIQ α...
  • Page 54 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Installation of Two Probe Adapter & LOGIQ α200 Probe Adapter (Optional) (contd.,) 4.) Ensure that no probe is connected to the system. If connected remove it first.

  • Page 55: Installation Of Logiq™ 100 Pro With Global Or Modular Trolley

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-5-4 Installation of LOGIQ™ 100 PRO with Global or Modular Trolley Note: LOGIQ™ 100 PRO has two types of Trolleys, the Global Trolley and the Modular Trolley.
  • Page 56 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Installation of LOGIQ™ 100 PRO with Global or Modular Trolley (Contd.,) 2.) Unpack the Modular Trolley packed in a box by opening the top cover, refer Figure 3-8...
  • Page 57 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Installation of LOGIQ™ 100 PRO with Global or Modular Trolley (Contd.,) Figure 3-10 Modular Trolley Assembly Chapter 3 - Installation Page 3-13 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 5 8 o f 1 9 7...
  • Page 58 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Installation of LOGIQ™ 100 PRO with Global or Modular Trolley (Contd.,) 3.) Remove two M4X10 screws from the base ofLOGIQ™ 100 PRO and fix lock plate. Refer Figure 3-11 4.) Place the unit with lock plate fixed on Trolley, ensure that lock plate gets into the projection on...
  • Page 59 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Installation of LOGIQ™ 100 PRO with Global or Modular Trolley (Contd.,) 5.) Take the belt (provided in the kit) over the unit and lock it. Refer Figure 3-12 6.) Release the Keyboard by pressing the lock release and make it rest on the handle.
  • Page 60 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Installation of LOGIQ™ 100 PRO with Global or Modular Trolley (Contd.,) Figure 3-13 Installation of LOGIQ™ 100 PRO with Global or Modular Trolley Page 3-16 Section 3-5 - Completing the Installation...

  • Page 61: Adjustment Of Monitor Brightness & Contrast

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-5-5 Adjustment of Monitor Brightness & Contrast Turn ON the Machine and then adjust the monitor contrast and brightness. Monitor contrast and brightness should be adjusted according to the lighting in the room. For Monitor brightness and contrast adjustment refer to the appropriate section in the User Manual.

  • Page 62: Front View

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-6-1-2 Front View Figure 3-14 Front View Page 3-18 Section 3-6 - System Configuration Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 6 3 o f 1 9 7...
  • Page 63 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-6-1-3 Side View (Keyboard Closed) 420.6 (16.5) 405 (15 9) Figure 3-15 Side View (Keyboard Closed) 3-6-1-4 Side View (Keyboard Open) 596 (23.5) Figure 3-16 Side View (Keyboard Open)

  • Page 64: Side View (Keyboard Closed)

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL SIDE VIEW 3-6-1-5 Weight without Peripherals The Weight of LOGIQ™ 100 PRO without peripherals Model Weight [kg] LOGIQ™ 100 PRO 9.00 Table 3-4 Weight of LOGIQ™ 100 PRO...

  • Page 65: Power Supply

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-6-2-1 Power Supply The Following Power Line requirement should be monitored one week before Installation. We recommend that a Drantez model 605-3 Power line Monitor with options 101 to be used...
  • Page 66 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Printing should not be done while live scanning patients. Also, the Printer cable should not be attached to the LOGIQ™ 100 PRO during the scan. For Europe Only: All devices connected to the LOGIQ™...

  • Page 67: Peripherals Connections And Installation

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-6-4 Peripherals Connections and Installation 3.6.4.1 FootSwitch Connection The footswitch which is the remote FREEZE device is connected to the rear panel of the system. this extra FREEZE switch is provided to enhance flexibility to freeze images when the system is not within reach of the user.
  • Page 68 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3.6.4.2 Video Graphic Printer (VGP) Connect the Video Graphic printer (with USB A to USB B cable) to the USB port located on the rear panel of the system.
  • Page 69 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Figure 3-22 VCR connection to Rear panel Installation of VCR: 1.) Connect the SONY VCR 2.) Switch on the VCR and the LOGIQ™ 100 PRO unit. 3.) Press the Record key to record the image.
  • Page 70 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3.6.4.6 USB MEMORY STICK This module serves as an interface which enables users to transfer images from LOGIQ™ 100 PRO to USB memory stick. LOGIQ™ 100 PRO in JPEG format.This can be further uploaded to any PC having windows operating system and USB port support.
  • Page 71 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3.6.4.7 Available probes for LOGIQ™ 100 PRO See in Specifications in the LOGIQ™ 100 PRO User manual for probes and intended use. Probe Freq in Part No.

  • Page 72: Video Specification

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-6-5 Video Specification Video specifications may be needed to be able to connect laser cameras to the LOGIQ™ 100 PRO. General Parameter NTSC 525[Frame] 625[Frame] Total Number of Horizontal Lines...

  • Page 73: User Manual(S)

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 3-7-1 User Manual(s) Check that the correct User Manual(s), per software (sw) revision, for the system is included. 3-7-2 Product Locator Card Fill out proper customer information on the Product Locator Installation Card. Refer to Illustration below.
  • Page 74 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page 3-30 Section 3-7 - Paperwork Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 7 5 o f 1 9 7...

  • Page 75: Section 4-1

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 4 Functional Checks Section 4-1Overview 4-1-1 Purpose of Chapter 4 This chapter provides procedures for quickly checking major functions of the LOGIQ™ 100 PRO scanner, diagnostics by using the built-in service software, and power supply adjustments. For remaining functional checks please refer to the LOGIQ™...

  • Page 76: Section 4-2 General Procedures

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 4-2 General Procedures 4-2-1 Power On/Boot Up Note: After turning off the system, wait at least ten seconds before turning it on again. The system may not be able to boot if power is recycled too quickly.

  • Page 77: Front Panel On/Off

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 4-2-1-4 Front Panel ON/OFF Press the Front Panel ON/OFF key once. to Switch ON/OFF Figure 4-2 ON/OFF key on Front Panel When power is applied to the Scanner, Power is distributed to the Fan, Control panel, Monitor, Internal and External I/O’s, Boards &...

  • Page 78: Section 4-3 Functional Check Procedures

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 4-3 Functional Check Procedures To perform these tests, you will need a convex or a linear probe. These procedures should be per formed during installation. These procedures are also used as basic checks to use when service of the system is required.

  • Page 79: Power Up Monitor Display (Convex Probe)

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 4-3-1 Power Up Monitor Display (Convex Probe) Figure 4-3 Power Up Monitor Display (Convex Probe) Chapter 4 - Functional Checks Page 4-5 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 8 0 o f 1 9 7...

  • Page 80: Basic Controls

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 4-3-2 Basic Controls Table 4-2 describes basic controls which helps in checking the LOGIQ™ 100 PRO during installation. Connect the sector or convex transducer to connector on the right side of the base.
  • Page 81 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL TASK Expected Result CINE (Press Freeze and Rotate B/M Gain/ The Cine Gauge, menu and the Cine frame number Cine Scroll ) appears at the bottom of the display.
  • Page 82 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Basic Controls (Continued) Figure 4-4 B/M Mode Display Page 4-8 Section 4-1 - Overview Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 8 3 o f 1 9 7...

  • Page 83: Section 4-4 Diagnostics

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 4-4 Diagnostics The LOGIQ™ 100 PRO System service diagnostics comprises of: 1.) Self test or power on diagnostics 2.) Service diagnostic tools The self test or power on diagnostics are run every time the system is booted. The service diagnostic tools include test procedures for testing the system at PCB level as well as block level.

  • Page 84: Section 4-5 Software Configuration Checks

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 4-5 Software Configuration Checks Step Check Expected Result(s) If Not Remedy Check Date and Time setting Date and Time are correct Adjust the Date and Time setting...

  • Page 85: Section 4-7 Patient Contact Tools

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 4-7 Patient contact tools 4-7-1 Probe/Connectors Check Take the probes and check them as described below:. Step Check Expected Result(s) If Not Remedy To test each delivered Probe, Connect it...
  • Page 86 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Step Check Expected Result(s) If Not Remedy Hold the probe connector horizontally It will display the Probe name on the with the cable pointing Sideways. Screen Turn the connector locking handle to the Vertical position.

  • Page 87: Section 5-1Overview

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 5-1Overview 5-1-1 Purpose of Chapter 5 This chapter explains LOGIQ™ 100 PRO’s system concepts, component arrangement, and subsystem function. It also describes the Power Distribution System (PDS) and probes.

  • Page 88: Section 5-2 General Information

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 5-2 General Information 1.) Probe Holder 2.) Gel Bottle Holder 3.) Brightness & Contrast 4.) Handle 5.) Monitor 6.) Keyboard 7.) Probe connector 8.) Power Switch Figure 4-5 LOGIQ™...

  • Page 89: Section 5-3 Block Diagram

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 5-3 Block Diagram Block Diagram Control Davinciboard TRANSMIT Signal ECO Signal Probe Display Front End Board RECIEVE Signal Patient Patient Isolated Sensors External I/O COMPOSITE Signal...
  • Page 90 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL FEB Block Diagram. Figure 4-7 Block Diagram of FEB LOGIQ™ 100 PRO Page 5-4 Section 5-3 - Block Diagram Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 9 1 o f 1 9 7...

  • Page 91: Davinci Block Diagram

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 5-3-1 DAVINCI Block Diagram. Figure 4-8 Block Diagram of Davinci board LOGIQ™ 100 PRO Page 5-5 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 9 2 o f 1 9 7...

  • Page 92: Logiq™ 100 Pro Block Diagram

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 5-3-2 LOGIQ™ 100 PRO BLOCK DIAGRAM. Page 5-6 Section 5-3 - Block Diagram Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 9 3 o f 1 9 7...

  • Page 93: Pcb Nomenclature

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 5-3-3 PCB Nomenclature The following table lists the Circuit boards on LOGIQ™ 100 PRO system. Board Abbrv Description Remarks Davinci Davinci Board For LOGIQ™ 100 PRO (All S/W Versions) Keyboard For LOGIQ™...

  • Page 94: Section 5-4 Wiring Diagrams

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 5-4 Wiring Diagrams 5-4-0-1 Power Distributor/Power Supply Wiring Diagram Figure 4-9 Power Distributor/Power Supply Wiring Diagram for LOGIQ™ 100 PRO. Page 5-8 Section 5-3 - Block Diagram...
  • Page 95 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Table 4-10 Power Distributor Connector Voltages for LOGIQ™ 100 PRO . Connector J1 Connector J2 Connector J3 Connector J4 Power Supply Input to PDB Output Output Output...

  • Page 96: Cable Assembly Diagrams

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 5-4-0-2 Cable Assembly Diagrams Davinci board TGC connector Figure 4-10 Cable Assembly Wiring Diagram Page 5-10 Section 5-3 - Block Diagram Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 9 7 o f 1 9 7...
  • Page 97 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Cable Assembly Diagrams (Continued) Figure 4-10 Ferrite Core Over which wires wound 2 Turns Page 5-11 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 9 8 o f 1 9 7...

  • Page 98: Section 5-5 Functional Subsystems

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 5-5 Functional Subsystems 5-5-1 Front End Board The Front End Board generates the strong transmit bursts, transmitted by the probes as ultrasound into the body. It also receives weak ultrasound echoes from blood cells and body structure, amplifies the signals and converts them to an 8 bit digital signal.

  • Page 99: Davinci Board

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 5-5-2 Davinci Board The Davinci CPU board uses TMS320DM6446 chip that contains an ARM Processor, DSP and Video processors into a single chip. The Major functionalities & corresponding implementation is described below.

  • Page 100: Peripherals

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 5-5-3 Peripherals VCR, Black & White Video Graphic Printer and HP Laser Jet Printer 1020 can be connected to the scanner. For more details on recommended peripherals refer Chapter 3.
  • Page 101 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page 5-15 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 0 2 o f 1 9 7...
  • Page 102 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page 5-16 Section 5-7 - Rear Panel Signal List Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 0 3 o f 1 9 7...

  • Page 103: Chapter 6 Service Adjustments

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 6 Service Adjustments Section 6-1 Overview 6-1-1 Service Adjustments Available in LOGIQ™ 100 PRO The LOGIQ™ 100 PRO does not contain service adjustable parts. In case of failure of any module like the Power Supply, HV pcb it is recommended to replace the power supply unit instead of trying to adjust the potentiometer or replacing the fuse.
  • Page 104 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Your Notes: Page 6-2 Section 6-1 - Overview Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 0 5 o f 1 9 7...

  • Page 105: Chapter 7 Diagnostics/Troubleshooting

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 7 Diagnostics/Troubleshooting Section 7-1Overview 7-1-1 Purpose of Chapter 7 This section describes how to setup and run the tools and software that help maintain image quality and system operation.
  • Page 106 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL LED Indications and functions of PCB’s LED Location Function LED - Location on FEB This LED indicates the scan lines,the DSP is scanning.The LED glows when the cursor is moved in the B/M mode LED - Location on FEB This LED indicates the probe connect signal is good.This...

  • Page 107: Section 7-2 Power On Diagnostics

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 7-2 Power On Diagnostics The power on diagnostics or self tests are run every time the system is booted. This self tests include testing the validity of the system software through EPROM checksum test and testing the system RAM.

  • Page 108: Davinci Board Tests

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 7-2-1 DAVINCI Board Tests When this test is selected the following screen will appear. DAVINCI BOARD TESTS 1. ALL TESTS 2. EPROM CHECK SUM TEST 3. R/W MEMORY TEST 4.
  • Page 109 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL DAVINCI Board Tests (Contd.,) Graphics Test The pattern shown below is displayed on the monitor when this test is enabled. Figure 7-3 Graphics Test Press any key to exit the Graphics Test...
  • Page 110 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL DAVINCI Board Tests (Contd.,) Flash Memory Test The Following Menu is Displayed FLASH MEMORY TESTS ALL TESTS TEST FLASH MEMORY UPDATE ARCHIVE STATUS FROM FLASH ERASE FLASH...

  • Page 111: Feb Test For Logiq™ 100 Pro

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL DAVINCI Board Tests (Contd.,) Erase Flash memory When this option is run all the images stored in the flash is erased. Main Menu This option is used to return to the main menu.
  • Page 112 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Observe the FEB test pattern on the screen. Change the modes to B/B, B/M and M modes and check for the proper display of the FEB Test pattern.

  • Page 113: Keyboard Tests

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 7-2-3 Keyboard Tests When this Option is selected following Menu appears KEYBOARD TESTS ALL TESTS KEYBOARD ALIVE TEST KEYS TEST LEDS TEST TRACKBALL TEST GAINKNOB TEST MAIN MENU...

  • Page 114: Monitor Test

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 7-2-4 Monitor Test The following test patterns are displayed on the monitor when this test is enabled. Please match the patterns displayed on your monitor with the given patterns figures 7-7 to 7-13. The Gain Knob is used for selection of patterns 1-10.
  • Page 115 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Monitor Test (Contd.,) Figure 7-9 Monitor Test Figure 7-10 Monitor Test Chapter 7 - Diagnostics/Troubleshooting Page 7-11 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 1 6 o f 1 9 7...
  • Page 116 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Monitor Test (Contd.,) Figure 7-11 Monitor Test Figure 7-12 Monitor Test Page 7-12 Section 7-2 - Power On Diagnostics Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 1 7 o f 1 9 7...

  • Page 117: Key Operation History

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Monitor Test (Contd.,) Figure 7-13 Monitor Test Note: The patterns in 7-7 to 7-10 are written on the overlay where as the pattern in 7-11 to 7-13 is written on the image memory.

  • Page 118: Section 7-3 Error Reporting

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 7-3 Error Reporting 7-3-1 Error Reporting The following are the error messages available: Errors Remarks “THE KEYBOARD SUBSYSTEM FAILED This Message is displayed during the diagnostics of the Keyboard. When the keyboard TO RESPOND”...

  • Page 119: Section 7-4 Troubleshooting

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 7-4 Troubleshooting The following table is provided to help the service engineer during corrective maintenance. TROUBLESHOOTING Problem Faced Cause Solution No Display, total black out No AC Power...
  • Page 120 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Problem Faced Cause Solution System Resets intermittently 3.3 Volt power supply may be less. a. First check for the 3.3V DC supply to the CPU board & ensure Proper Voltage.
  • Page 121 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Machine Not Booting Chapter 7 - Diagnostics/Troubleshooting Page 7-17 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 2 2 o f 1 9 7...
  • Page 122 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page 7-18 Section 7-4 - Troubleshooting Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 2 3 o f 1 9 7...
  • Page 123 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Machine Resets Intermittently Chapter 7 - Diagnostics/Troubleshooting Page 7-19 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 2 4 o f 1 9 7...
  • Page 124 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Junk Image in the Scan Area Page 7-20 Section 7-4 - Troubleshooting Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 2 5 o f 1 9 7...
  • Page 125 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Langauge and Date not getting updated. Chapter 7 - Diagnostics/Troubleshooting Page 7-21 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 2 6 o f 1 9 7...
  • Page 126 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL No Scan Image, Probe is firing. Page 7-22 Section 7-4 - Troubleshooting Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 2 7 o f 1 9 7...
  • Page 127 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Your Notes: Chapter 7 - Diagnostics/Troubleshooting Page 7-23 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 2 8 o f 1 9 7...
  • Page 128 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page 7-24 Section 7-4 - Troubleshooting Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 2 9 o f 1 9 7...

  • Page 129: Chapter 8 Replacement Procedures

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 8 Replacement Procedures Section 8-1 Overview 8-1-1 Purpose of Chapter 8 This chapter holds replacement procedures for the following modules/subsystems. CONTENTS IN CHAPTER 8 Page Section...

  • Page 130: Section 8-2 Top Cover

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 8-2 Top Cover 8-2-1 Disassembly/Assembly of Top Cover Follow the steps below and refer Figure 8-1, For FRU Details refer 9-1-2 1.) Always Shut Down the System when disassembling the TOP COVER 2.) Disconnect the power cord from the mains and remove from the system.
  • Page 131 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Disassembly/Assembly (Cont’d.) Handle Cap Probe Holder Figure 8-1 Disassembly/Assembly of Top Cover Chapter 8 - Replacement Procedures Page 8-3 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 3 2 o f 1 9 7...

  • Page 132: Section 8-3Keyboard

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 8-3KEYBOARD 8-3-1 Detaching the Keyboard Follow the steps below and refer Figure 8-2. For FRU Details refer 9-1-3 1.) Remove Front Panel. Refer 8-4-1. 2.) Remove 14-pin connector from the Davinci.
  • Page 133 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Detaching the Keyboard (Cont’d.) Figure 8-2 Detaching the Keyboard Chapter 8 - Replacement Procedures Page 8-5 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 3 4 o f 1 9 7...

  • Page 134: Keyboard Disassembly/Assembly

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 8-3-2 Keyboard Disassembly/Assembly Follow steps below and refer Figure 8-3 . For FRU Details refer 9-1-4 1.) Remove Top Cover. Refer 8-2. 2.) Detach the keyboard. Refer 8-3-1.
  • Page 135 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Keyboard Assembly/Disassembly (Cont’d.) q (11 Nos) Figure 8-3 Keyboard Disassembly Chapter 8 - Replacement Procedures Page 8-7 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 3 6 o f 1 9 7...

  • Page 136: Optical Trackball Assembly

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 8-3-2-1 Optical Trackball Assembly Procedure for LOGIQ™ 100 PRO 1.) Assemble TB Base Pad 2230750 (x). Refer Figure 8-4 2.) Assemble Optical Trackball PCB Assembly 2224019 (y) refer Figure 8-4 3.) Ensure that Trackball alignment is OK on the Key sheet.
  • Page 137 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 8-3-2-2 Optical Trackball Assembly Procedure for LOGIQ™ 100 PRO Assemble TB Base Pad2 2222115. Refer Figure 8-5 9.) Assemble Optical Trackball PCB Assembly 2224019 refer Figure 8-5 10.)Ensure that Trackball alignment is OK on the Key sheet.

  • Page 138: Section 8-4 Front Panel/Monitor

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 8-4 FRONT PANEL/MONITOR 8-4-1 Disassembly/Assembly of Front Panel Follow steps below and refer Figure 8-6 For FRU Details refer 9-1-5 1.) Remove Top Cover. Refer 8-2 2.) Lock the Keyboard before removing the front panel.
  • Page 139 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Disassembly / Assembly of Front Panel (Cont’d.) Lock Hold Power Switch Figure 8-6 Assembly & Disassembly of Front Panel. Chapter 8 - Replacement Procedures Page 8-11 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 4 0 o f 1 9 7...

  • Page 140: Disassembly/Assembly Of Monitor

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 8-4-2 Disassembly/Assembly of Monitor Follow steps below and refer Figure 8-7. For FRU Details refer 9-1-6 1.) Remove Top Cover. Refer 8-2 2.) Remove Front Panel. Refer 8-4-1 3.) Disconnect the communication cables between the Analog and Digital circuits.
  • Page 141 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Figure 8-7 Disassembly/Assembly of Monitor Chapter 8 - Replacement Procedures Page 8-13 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 4 2 o f 1 9 7...

  • Page 142: Section 8-5 Pcbs

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 8-5 PCBs 8-5-1 Disassembly/Assembly of Davinci Board. Follow steps below and refer 1.) Remove Top Cover. Refer 8-2. For FRU Details refer 9-1-7 to 9-1-9 2.) For disassembling both Davinci Board and FEB Board together, remove all communications and power cables from the Davinci board and FEB board.

  • Page 143: Disassembly/Assembly Of Davinci Board

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Disassembly/Assembly of Davinci Board. Figure 8-8 Disassembly/Assembly of Davinci Board. Chapter 8 - Replacement Procedures Page 8-15 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 4 4 o f 1 9 7...
  • Page 144 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Disassembly/Assembly of Davinci Board(Cont’d). Figure 8-9 Davinci Board Disassembly Page 8-16 Section 8-5 - PCBs Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 4 5 o f 1 9 7...
  • Page 145 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Dip Switch Figure 8-10 Davinci board Dip Switch Setting for NTSC & PAL Chapter 8 - Replacement Procedures Page 8-17 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 4 6 o f 1 9 7...

  • Page 146: Disassembly/Assembly Of Feb For Logiq™ 100 Pro

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 8-5-2 Disassembly/Assembly of FEB for LOGIQ™ 100 PRO Follow steps and refer 1.) Remove Top Cover. Refer 8-2. For FRU Details refer 9-1-10 2.) Remove the screw fixing the FEB PCB to the Rear panel bracket.
  • Page 147 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Mating connector Davinci & FEB Figure 8-11 Disassembly/Assembly of FEB Chapter 8 - Replacement Procedures Page 8-19 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 4 8 o f 1 9 7...

  • Page 148: Section 8-6 Fan Assembly

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 8-6 Fan Assembly 8-6-1 Disassembly/Assembly of Fan Follow steps below and refer Figure 8-12. For FRU Details refer 1.) Remove Top Cover. Refer 8-2. 2.) Remove 2 screws (a,d) and loosen screws b,c from the chassis.

  • Page 149: Section 8-7 Power Supply/Distributor Pcb

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 8-7 Power Supply/Distributor PCB 8-7-1 Disassembly/Assembly of Power Supply/Distributor PCB Follow steps below and refer 8-13 1.) Remove Top Cover. Refer 8-2. For FRU Details refer 2.) Remove Front Panel.

  • Page 150: Section 8-8 Rear Panel

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 13.) For assembly follow the reverse order. Figure 8-13 Disassembly/Assembly of Power Supply/Distributor PCB Service Manual Section Functional Test/ Diagnostic Test Debrief Script 4-2-1 Power ON/ Boot up...
  • Page 151 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 5.) Remove the connections to the circuit breaker. 6.) Remove the rear panel from the chassis. 7.) For assembly follow the reverse order. Table 8-11 Functional tests...

  • Page 152: Section 8-9 Hv Assembly

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 8-9 HV Assembly 8-9-1 Disassembly/Assembly of HV Assembly Follow steps below and refer 8-15 1.) Remove Top Cover. Refer.8-2. For FRU Details refer 2.) Remove the Shield Plate.

  • Page 153: Section 8-10 Chassis

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 8-10 Chassis 8-10-1 Disassembly/Assembly of Chassis. Follow steps below and refer 8-16 Remove Top Cover. Refer 8-2. For FRU Details refer 9-1-12 Remove Front Panel. Refer 8-4-1 Remove Monitor Assembly.

  • Page 154: 5305880-100, Revision

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 1201 1202 Figure 8-16 Disassembly/Assembly of Chassis Page 8-26 Section 8-10 - Chassis Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 5 5 o f 1 9 7...

  • Page 155: Chapter 9 Replacement Parts

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 9 Replacement Parts Section 9-1Overview 9-1-1 Purpose of Chapter 9 This chapter gives you an overview of Spare Parts for LOGIQ™ 100 PRO. CONTENTS IN CHAPTER 9...
  • Page 156 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL MATERIAL LIST - LOGIQ™ 100 PRO Part Name Part No. QTY. Description Operator Console Assembly 5304117 100-230VAC, 50/60Hz, PAL, GEMS-A. 5304414 100-230VAC, 50/60Hz, PAL, GEMS-A/AM. 5304240 100-230VAC, 50/60Hz, NTSC, GEMS-A/AM.

  • Page 157: Material List - Top Cover

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-2 MATERIAL LIST - Top Cover OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Figure 9-1 Top Cover Table 9-1 Top Cover Item Part Name Part No. Description Top Cover Assembly 5318780 LOGIQ™...

  • Page 158: Material List - Keyboard

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-3 MATERIAL LIST - KEYBOARD OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Figure 9-2 Keyboard Table 9-2 Keyboard Item Part Name Part No. Description Keyboard Assembly 5305699 LOGIQ™ 100 PRO...

  • Page 159: Material List - Keyboard Assembly

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-4 MATERIAL LIST - KEYBOARD ASSEMBLY OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Figure 9-3 Keyboard Assy Chapter 9 - Replacement Parts Page 9-5 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 6 0 o f 1 9 7...
  • Page 160 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Table 9-3 Keyboard Assembly Item Part Name Part No. Description Keyboard PCB 5131077 LOGIQ™ 100 PRO Keysheet With Base Plate 5135264 LOGIQ™ 100 PRO Includes bracket, screws, FPC cable & instruction.

  • Page 161: Material List - Front Panel

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-5 MATERIAL LIST - FRONT PANEL OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Front Panel Figure 9-4 Front Panel Table 9-4 Front Panel Item Part Name Part No. Description Front Panel Assembly 2337067 LOGIQ™...

  • Page 162: Material List - Monitor

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-6 MATERIAL LIST - Monitor OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Figure 9-5 Monitor Table 9-5 Monitor Item Part Name Part No. Description Monitor Assembly (CRT+PCB) with 2139789-3 LOGIQ™ 100 PRO...

  • Page 163: Material List - Davinci

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-7 MATERIAL LIST - DAVINCI OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Figure 9-6 Davinci Board Table 9-6 Davinci Item Part Name Part No. Description Davinci Assy (PAL/NTSC) 5212995 LOGIQ™ 100 PRO 1.) Davinci is common for PAL &...
  • Page 164 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-8 Material List - FEB OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Figure 9-7 FEB Assembly Table 9-7 Item Part Name Part No. Description FEB Assy 5199849 LOGIQ™ 100 PRO...
  • Page 165 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-9 MATERIAL LIST - Power Supply/Distributor PCB OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Figure 9-8 Power Supply/Distributor PCB Table 9-8 Power Supply/Distibutor PCB Item Part Name Part No. Description...
  • Page 166 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-10 MATERIAL LIST - Rear Panel OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. Figure 9-9 Rear Panel Assembly Table 9-9 Rear Panel Assy Item Part Name Part No. Description Rear panel Assembly 5305191 LOGIQ™...
  • Page 167 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-11 MATERIAL LIST - HV Power Supply Assembly OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. 1001 Figure 9-10 HV Power Supply Assembly Table 9-10 HV Power Supply Assembly Item Part Name Part No.
  • Page 168 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 9-1-12 MATERIAL LIST - Cable Assembly OPERATOR CONSOLE ASSY 5304117,5304414,5304240,5304248,5304441,5304596,5306834. FRU No. PART NAME PART NO. DESCRIPTION 1301 LOGIQ™ 100 PRO Cable Set 5308178 For LOGIQ™ 100 PRO Table 9-2 Cable Assembly for LOGIQ™...
  • Page 169 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Notes: Chapter 9 - Replacement Parts Page 9-15 Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 7 0 o f 1 9 7...
  • Page 170 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Page 9-16 Section 9-1 - Overview Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 7 1 o f 1 9 7...

  • Page 171: Chapter 10 Quality Assurance

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Chapter 10 Quality Assurance Section 10-1 Overview 10-1-1 Purpose of Chapter 10 This chapter describes Quality Assurance & Periodic Maintenance (PM) on the scanner and its peripherals. These PM procedures are intended to maintain the quality of the ultrasound systems performance.

  • Page 172: Section 10-2 Why Do Periodic Maintenance

    100 PRO periodic maintenance is performed as scheduled in order to retain its high level of safety, dependability and performance. Your GE Service Representative knows your LOGIQ™ 100 PRO best and can provide competent, efficient service. Please contact us for further information and to schedule GE Medical Systems Ultrasound to perform this service for you.
  • Page 173 ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Service at Indicated Time Daily Weekly Monthly Annually Notes •* Clean Probes * or before each use • Clean Probe Holders • Inspect AC Mains Cable Mobile Unit Check Weekly •...

  • Page 174: Section 10-4 Tools Required

    EVISION ERVICE ANUAL Section 10-4 Tools Required 10-4-1 Standard GE Tool Kit The following is a description of the “Standard” GE tool kit in the USA. Not all tools are required for PMs Tool ID Description Tool ID Description 9-45358...
  • Page 175 Flashlight Mini-Mag Lite (AAA Bat.) 9-GH408 Tweezers 21576 Brush - Bristle 9-4516 Pliers 4 1/4 inch Diagonal Table 10-3 Overview of GE-1 Tool Kit Contents (Continued) GE-2 Sears Kit (#99034) Tool ID Description Tool ID Description 9-45381 Pliers, Arc Joint 9 1/2 inch 9-44067 Socket 1 1/16 in.

  • Page 176: Special Tools, Supplies And Equipment

    9-GH19512 Countersink 1/2 inch 9-44046 3/8 inch Socket Set 9-44741 12 PC Combination Wrench Set Table 10-4 Overview of GE-2 Tool Kit Contents (Continued) 10-4-2 Special Tools, Supplies and Equipment 10-4-2-1 Specific Requirements for Periodic Maintenance See Chapter 7 Tool...

  • Page 177: Section 10-5 System Periodic Maintenance

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 10-5 System Periodic Maintenance 10-5-1 Preliminary Checks The preliminary checks take about 15 minutes to perform. Refer to the system user documentation whenever necessary. Step Item Description Ask & Listen Ask the customer if they have any problems or questions about the equipment.

  • Page 178: Functional Checks (See Also Chapter 4)

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-5-2 Functional Checks (See Also Chapter 4) The functional checks take about 30 minutes to perform. Refer to the system user documentation whenever necessary. 10-5-2-1 System Checks...

  • Page 179: Peripheral/Option Checks

    Verify hardcopy output of the B/W printer. Clean heads and covers if necessary. Printer Footswitch Verify that the footswitch is functioning as programed. Clean as necessary. Table 10-8 GE Approved Peripheral/Hardware Option Functional Checks 10-5-3 Input Power 10-5-3-1 Mains Cable Inspection...

  • Page 180: Physical Inspection

    The system user manuals and various probe handling cards provide a complete description of probe care, maintenance, cleaning and disinfection. Ensure that you are completely familiar with the proper care of GE probes. Ultrasound probes can be easily damaged by improper handling. See the User Manual and probe care cards for more details.

  • Page 181: Basic Probe Cleaning

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-5-6-3 Basic Probe Cleaning Refer to the User’s Manual for details on probe cleaning. To help protect yourself from blood borne diseases, wear approved disposable gloves. These are made of nitrile derived from vegetable starch to prevent allergic latex reactions. Failure to follow the prescribed cleaning or disinfection procedures will void the probe’s warranty.
  • Page 182 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Test the system, peripherals and probes for leakage current. Excessive leakage current can cause injury or death in sensitive patients. High leakage current can also indicate degradation of insulation and a potential for electrical failure.

  • Page 183: Gems Leakage Current Limits

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-2 GEMS Leakage Current Limits The following limits are summarized for NFPA 99 (For USA) and IEC 60601-1 Medical Equipment Safety Standards. These limits are GEMS standards and in some cases are lower than the above standards listed.

  • Page 184: Outlet Test - Wiring Arrangement - Usa & Canada

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-3 Outlet Test - Wiring Arrangement - USA & Canada Test all outlets in the area for proper grounding and wiring arrangement by plugging in the neon outlet tester and noting the combination of lights that are illuminated.

  • Page 185: Grounding Continuity

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-4 Grounding Continuity Electric Shock Hazard. The patient must not be contacted to the equipment during this test Measure the resistance from the third pin of the attachment plug to the exposed metal parts of the case.

  • Page 186: Chassis Leakage Current Test

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-5 Chassis Leakage Current Test 10-6-5-1 Definition This test measures the current that would flow in a grounded person who touched accessible metal parts of the bedside station if the ground wire should break. The test verifies the isolation of the power line from the chassis.

  • Page 187: Dale 600 Meter Procedure

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-5-3 Dale 600 Meter Procedure When measuring system chassis currents with the Dale 600, always use the CHASSIS selection of the external/chassis function switch. This requires the ground clip lead and changing the meters switches in accordance with the IEC 601-1.1.

  • Page 188: Data Sheet For Chassis Source Leakage Current

    GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-5-4 Data Sheet for Chassis Source Leakage Current The test passes when all readings measure less than the value shown in Table 10-13. Record all data on the PM Inspection Certificate.

  • Page 189: Direction 5305880-100, Revision 3 Logiq™ 100 Pro Service Manual

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-6 Probe Leakage Current Test 10-6-6-1 Definition This test measures the current that would flow to ground from any of the probes through a patient who is being scanned and becomes grounded by touching some other grounded surface. 10-6-6-2 Generic Procedure for Leakage current Measurements should be made with the ground open and closed, with power line polarity normal...
  • Page 190 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 7.) Power ON the LOGIQ™ 100 PRO unit. 8.) Depress the LIFT GROUND rocker switch and record the highest current reading. 9.) Follow the test conditions described in Table 10-18 for every probe.

  • Page 191: Meter Procedure Using Probe Adapter To Measure Probe Isolation(Sink) Current

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10-6-6-4 Meter Procedure using Probe Adapter to measure Probe isolation(Sink) Current The Dale 600/600E provides a method for testing probes independently from the system.The meter utilizes a probe adapter to apply a test potential commonly to all connector pins. The probe's imaging area is immersed in a saline solution along with a grounding probe from the meter to complete the current path.Saline solution is a mixture of water and salt.
  • Page 192 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL 10.6.6.5 Data sheet for Probe Source Leakage Current The test passes when all readings measure less than the values shown in Table 10-14 and Table 10-15. Record all data on the Planned Maintenance Inspection Certificate.

  • Page 193: Section 10-7 When There's Too Much Leakage Current

    ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Section 10-7 When There's Too Much Leakage Current... CHASSIS FAILS Check the ground on the power cord and plug for continuity. Ensure the ground is not broken, frayed, or intermittent. Replace any defective part. Tighten all grounds.
  • Page 194 (if applicable) Inspect Clean B-Mode Function Console M-Mode Function Monitor Control Panel Cables and Connectors Monitor GE Approved Peripherals (VCR, VGP) Applicable Software Options Probe Holders Applicable Hardware Options External I/O Measurement Accuracy GE Approved Peripherals COMMENTS: ________________________________________________________________ ________________________________________________________________ ________________________________________________________________...
  • Page 195 ALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL ELECTRICAL SAFETY Max Value Value Electrical Test Performed Allowed Measured Comments Outlet (correct ground &wiring config.) System Ground Continuity Chassis Source Leakage Current - Probe Patient Lead Source Leakage (Lead to Ground) Patient Lead Source Leakage (Lead to Lead)
  • Page 196 GE H EALTHCARE 5305880-100, R LOGIQ™ 100 PRO S IRECTION EVISION ERVICE ANUAL Your Notes: Page 10-26 Section 10-6 - Electrical Safety Tests Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 9 7 o f 1 9 7...

Table of Contents