GE LOGIQ Totus Basic Service Manual page 293

Direction 5936427, Rev. 1
Table 7-15
Agent Status
Agent Registered
Agent Quarantine
Agent CRM Verified
Agent Model Number
Serial Number
CRM No
Display Name
Agent Connected
Last Connected Time
Advanced Configuration
Server
Enterprise Host
Enterprise Port
Software Download URL
Proxy Configuration
Enable Proxy
Proxy Server
Proxy Port
GE HealthCare CONFIDENTIAL
Agent Configuration (Continued)
Element
Status for the agent. Valid values are:
• Running
• Not Running
Registration status of the agent. Valid values are:
• Yes – The agent is registered in the back office.
• No – The agent is not registered in the back office.
• Not Available – The agent is not configured or running.
Quarantine status of the agent. Valid values are:
• Yes – The agent has more than one device registered with the same CRM Number in
the back office. This scanner cannot send data back to GE HealthCare or be remotely
accessed.
• No – The agent has one device registered with the listed CRM Number in the back office.
• Not Available – The agent is not configured or running.
Verification status of the Customer Relationship Management (CRM) number for the
agent. Valid values are:
• Yes – The CRM number for the agent is verified in the back office.
• No – The CRM number for the agent is not verified in the back office.
• Not Available – The agent is not configured or running.
GE HealthCare part number for the LOGIQ Totus. The same number as listed on the rating
plate.
Serial number of the agent (read-only). If the agent is not registered with a serial number,
this field is populated with the serial number of the LOGIQ Totus. The serial number of the
agent is tied to the serial number of the LOGIQ Totus.
Customer Relationship Management (CRM) number. System identifier assigned to the
customer unit by the service region. CRM is pre-populated by adding LTotus to the CRM
number. The CRM number of the LOGIQ Totus is editable.
Displayed name of the agent.
Connection status of the agent. Valid values are:
• Yes – The agent is connected to the back office.
• No – The agent is not connected to the back office.
• Not Available – The agent is not configured or running.
When Agent Connected is Yes, the last time the LOGIQ Totus successfully connected to
the agent. When Agent Connected is No, this field does not display.
Name of the enterprise server. Should be set to Production. Do not use the IP address of
the enterprise server using the "other" selection as Windows 10 has removed the ability to
bypass a certificate error that occurs when using the IP address. This error can block
connectivity.
Number of the enterprise host. Should be set to insite.gehealthcare.com.
Number of the enterprise port. Should be set to 443.
Address where software will be downloaded from to the LOGIQ Totus.
Enables the proxy server.
When Enable Proxy is selected, name of the proxy server IP provided by the customer.
When Enable Proxy is selected, number of the proxy server port provided by the customer.
Chapter 7 Diagnostics/Troubleshooting
LOGIQ Totus Basic Service Manual
Description
7 - 43