GE LOGIQ Totus Basic Service Manual page 361

D 5936427, R
IRECTION EV
Table 8-15
4.
Wait until the system goes through the whole loading process.
System will boot up to applications automatically after about 30
minutes.
5.
You will several screens as the application software is being
loaded. Let it run.
At this point, the load time will be approximately 20 minutes.
6.
Once the software installation is complete the
LOGIQ Totus will restart twice.
When the LOGIQ Totus restarts, it will be active and ready for
testing.
GE HealthCare CONFIDENTIAL
. 1
Loading Software from the Internal Partition (Continued)
Step
Section 8-4 - Loading / Reloading / Upgrading the Software
LOGIQ T
Basic Service Manual
OTUS
Corresponding Graphic
8 - 35