GE LOGIQ Totus Basic Service Manual page 607

Direction 5936427, Rev. 1
Section 10-3
Maintenance Task Schedule
10-3-1 How often should care and maintenance tasks be performed?
The care and maintenance task schedule specifies how often your Ultrasound system should be
serviced and outlines items requiring special attention.
NOTE: It is the customer's responsibility to ensure the Ultrasound system care and maintenance is
performed as scheduled in order to retain its high level of safety, dependability, and
performance.
Your GE HealthCare Service Representative has an in-depth knowledge of your Ultrasound system and
can best provide competent, efficient service. Contact GE HealthCare for coverage information and/or
price for service.
The service procedures and recommended intervals shown in the Care and Maintenance Task
Schedule assumes that you use your Ultrasound system for an average patient load and not use it as
a primary mobile Ultrasound system which is transported between diagnostic facilities.
NOTE: If conditions exist which exceed typical usage and patient load, then it is recommended to
increase the care and maintenance frequencies.
Refer to the Customer Care Schedule in the service manual for the Ultrasound system for the
recommended care and maintenance schedule.
Table 10-1 "Customer Care Schedule" on page
GE HealthCare CONFIDENTIAL
10-6.
Chapter 10 Care & Maintenance
LOGIQ Totus Basic Service Manual
10 - 5