Setting Up Connectivity And Tips - GE LOGIQ Totus Basic Service Manual

Direction 5936427, Rev. 1
Section 3-7

Setting Up Connectivity and Tips

Connection Manager allows configuration of all connectivity functions on the Ultrasound system. Select
Connectivity on the Utility Touch Panel page to launch Connection Manager. When Connectivity is
selected:
• If Connectivity was not previously set up on the Ultrasound system, the Scanner page displays.
• If Connectivity was set up on the Ultrasound system, the Summary page displays.
It is recommended to initially set up each area of Connectivity in the sequence they are listed across the
top of the Connection Manager page, from left to right. Navigate through Connection Manager from left
to right by selecting the icons at the top of the screen or by selecting Next or Previous at the bottom of
the screen. The recommended setup sequence is:
• "Scanner" on page 3-42
• "Network" on page 3-43
-
-
-
-
• "MyComputer Device" on page 3-47
-
-
-
-
-
-
-
-
• "Dicom" on page 3-55
-
-
-
-
-
• "Special Devices" on page 3-63
-
-
-
-
-
-
-
• "Print Button" on page 3-72
• "Dataflow" on page 3-74
• "Advanced Settings" on page 3-75
• "Summary" on page 3-83
GE HealthCare CONFIDENTIAL
"Network General" on page 3-43
"Network Wired" on page 3-44
"Network Wireless" on page 3-45
"Network Proxy" on page 3-46
"EzBackup" on page 3-47
"Removable Media" on page 3-48
"HD Export" on page 3-49
"DICOM Export" on page 3-50
"Save As" on page 3-51
"USB Quick Save" on page 3-52
"Standard Printer" on page 3-53
"Video Capture" on page 3-54
"Dicom device" on page 3-55
"Dicom Web device" on page 3-56
"Dicom special device" on page 3-57
"Dicom services" on page 3-58
"Services for special devices" on page 3-61
"Tricefy" on page 3-64
"KOIOS" on page 3-65
"Device Mgmt" on page 3-66
"InSite" on page 3-67
"Syslog" on page 3-68
"Data Streaming" on page 3-70
"Vscan Air" on page 3-71
Chapter 3 LOGIQ Totus Setup
LOGIQ Totus Basic Service Manual
3 - 39