Replacement Of The Probe Holder Set-T - GE LOGIQ Totus Basic Service Manual

D 5936427, R
IRECTION EV
8-7-3

Replacement of the Probe Holder Set-T

This table includes information specific to these instructions. For more information
for servicing the LOGIQ Totus" on page 8-5 /8-2-7 "PPE Required During Service" on page 8-6
Table 8-39
Manpower
One person
8-7-3-1 Removal Procedure
Press the button underneath the T2 Side Probe Holder Left and
1.
slide to the left to remove from the console
Press the button underneath the T2 Side Probe Holder Right and
2.
slide to the right to remove from the console.
8-7-3-2 Installation Procedure
1.) Parts to be installed in reverse order of removal
2.) Perform "Functional Checks after FRU replacement (Debrief Guideline)" as described in
12 on page 8-223
8 - 90
GE HealthCare CONFIDENTIAL
. 1
Manpower, Time, Tools, and PPE
Time
Approximately 5 minutes
Step
Section 8-7 - Replacing OPIO
LOGIQ T
Tools
No tools required
Corresponding graphic
Basic Service Manual
OTUS
8-2-6 "Tools needed
PPE
Cut resistant gloves
Knee Pad
Section 8-