GE LOGIQ Totus Basic Service Manual page 135

Direction 5936427, Rev. 1
3-7-4-7 Standard Printer
Use Standard Printer to add an onboard printer in the Ultrasound system.
Table 3-20 To Configure Standard Printer
1.
Navigate to Connectivity > Connection Manager > MyComputer
Device.
2.
Select +Add.
3.
Select Standard Print > Add.
4.
In Name, enter a logical name of the service.
5.
In Printer, select the printer for this service.
6.
In the remaining fields, select the printer preferences.
7.
Select Done.
GE HealthCare CONFIDENTIAL
Step
Chapter 3 LOGIQ Totus Setup
LOGIQ Totus Basic Service Manual
Corresponding Graphic
3 - 53