Power Jumper Contacts; Figure 4 Power Jumper Contacts - WAGO 750 Product Manual

Properties

3.4 Power Jumper Contacts

The potential for the field supply is fed in via the blade contacts and passed on via the
spring contacts.
No.
1
2
3
4
5
Arrangement in the Bus Node
For mechanical arrangement of the I/O module, the previous component must have at
least 2 open grooves for accommodating the blade contacts.
For electrical compatibility requirements see Section
10 Product manual | Version: 3.0.0
SMI Master LoVo; 24 VDC
Type
Groove with spring contact
Groove without contact
Blade contact
Figure 4: Power Jumper Contacts
8 Circuit Diagram
[} 11].
753-1631