Acquisition Control; Change The Frame Rate - IAI GO-2400M-PGE-1 User Manual

Cmos digital progressive scan monochrome and color camera with gige interface

Table of Contents

GO-2400MC-PGE-1 | GO-2401MC-PGE-1 | User Manual (Ver. 1.0)

Acquisition Control

Related Setting Items:

Perform operations and configure settings related to image acquisition in Acquisition Control. The

following acquisition modes are available on the camera.

Acquisition

Mode

Single Frame

Acquire a single frame when the Acquisition Start command is executed.

Acquire the number of frames specified in Acquisition Frame Count when the Acquisition

Multi Frame

Start command is executed.

Continuous

Acquire images continuously until the Acquisition Stop command is executed.

When Trigger Mode is disabled, you can change the frame rate in Acquisition Frame Rate.

Notes:

The shortest frame period varies depending on the ROI, Pixel Format, and Binning Mode

selected. The longest frame period is 0.125 Hz (8 sec.).

When Trigger Mode is enabled, the Acquisition Frame Rate setting is disabled.

AcquisitionControl

Description

- 42 -

Main Functions

Table of Contents

Go-2400c-pge-1 Go-2401m-pge-1 Go-2401c-pge-1