Frame Start Trigger - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

Frame Start Trigger

In this camera, Data Leader and Data Trailer are added to every frame. The number of lines per
frame is set by Offset Y and Height of ImageFormatControl.
Offset Y's setting range is 0 to 4096. The Height setting range is 1 to 4096.
One Frame of Image Data (Offset Y = 0)
One Frame of Image Data (Offset Y > 0)
When using Frame Start Trigger, after receiving Frame Start Trigger, skip the image data of the
number of lines of Offset Y and send the data of Data Leader, image data, and Data Trailer.
(Upon completion of data transmission for one frame, no data will be sent until the next Frame
Start Trigger is received.)
Caution: Chunk Data (first line of every frame only) is sent after Data Trailer.
- 57 -
Main Functions