Control Via External Triggers - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

Control via External Triggers

When Controlling the Exposure Time Using Specified Exposure Times
Configure the settings as follows.
Item
Trigger Mode
Trigger Selector
Trigger Source
Trigger Activation
Exposure Mode
Exposure Time
1. Set Exposure Mode to Timed. (Timed = Default).
2. Specify the Exposure Time in Exposure Time.
3. Set Trigger Mode to On, and set Trigger Selector to Line Start.
4. Configure the Trigger Source and Trigger Activation settings, if necessary.
Setting Value / Selectable Range
On
Line Start
Any
RisingEdge (rising edge of input signal)
FallingEdge (falling edge of input signal)
Timed (control via exposure time)
Varies depending on settings.
- 27 -
Preparation