Before You Start; Basic Information; Proceeding; Advanced Thermal Design (Atd) - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

2

Before you start

2.1

Basic information

2.1.1

Proceeding

Before you start any upgrade or maintenance task, proceed as follows:
▶ Carefully read the safety instructions, see
page 29.
▶ Make sure that all necessary manuals are available, see
overview" on page
▶ Make yourself familiar with the procedure categories, see
procedures" on page
▶ Ensure that all required tools are available, see
page 25.
2.1.2

Advanced Thermal Design (ATD)

The ATD option allows you to operate the system with a wider temperature
range either of 5 °C to 40 °C or 5 °C to 45 °C, depending on your system and
configuration.
CAUTION
▶
In a system that is configured with ATD, only certain components
which support the respectively increased higher operating
temperature range may be installed and used. For applicable
restrictions, see the official configurator tool.
TX1320 M5
26. Print the PDF files if required.
21.
This option can only be ordered from the
manufacturer and is indicated by the respective
logo on the identification rating plate.
Upgrade and Maintenance Manual
"Important information" on
"Documentation
"Classification of
"Tools you need at hand" on
19