Table of Contents
Advertisement
9
Expansion cards and riser
modules
Safety notes
V
CAUTION!
Do not damage or modify internal cables or devices. Doing so may
●
cause a device failure, fire, or electric shock.
Devices and components inside the server remain hot after
●
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
If devices are installed or disassembled using methods other than
●
those outlined in this chapter, the warranty will be invalidated.
For more information, see chapter
●
page
27.
GX2460 M1
Upgrade and Maintenance Manual
"Important information" on
109
Advertisement
Table of Contents
