Table of Contents
Advertisement
92
5.6
Software operating modes
The software of the control panel offers various operating modes:
• Manual mode
Manual mode is the simplest operating mode. There are no
programs/seam programs and no inputs for individual seam
sections.
Changes to the sewing foot pressure, the fullness, the stitch
length, and the needle thread tension and, also, the activa-
tion of other functions are always implemented immediately.
All the major sewing parameters can be changed manually
during the sewing process.
• Automatic mode
Automatic mode allows for the execution of setups (seam
program comprised of only one seam section) or complex
seam programs (comprising 2 or more seam sections).
Seam programs are divided into individual seam sections.
Each section is assigned its own individual stitch length,
needle thread tension, etc.
• Programming
Programming mode makes it possible to create, adjust or
delete a seam program in a quick and easy manner.
The individual modes and their uses are explained in detail later on.
Programming Commander DELTA
Operating Instructions D887 e-con - 00.0 - 11/2023
Advertisement
Table of Contents
