Dürkopp Adler D887 e-con Operating Instructions Manual page 146

144
Setting options Sewing foot pressure
Menu item Setting 1
Linear Sewing foot pressure
Value range
00 – 20
Min. Material thickness
Value range
00.0 – 10.0 [mm]
Max. Material thickness
Value range
00.0 – 10.0 [mm]
Linear Offset
Value range
with
-20 – 20
offset
Min. material thickness
Value range
00.0 – 10.0 [mm]
Max. material thickness
Value range
00.0 – 10.0 [mm]
Programming Commander DELTA
Operating Instructions D887 e-con - 00.0 - 11/2023
Setting 2
Maximum sewing foot
pressure reached at the
upper material thickness
limit.
Material thickness at which
the increase in sewing foot
pressure should start.
Material thickness up to
which the increase in sewing
foot pressure should occur.
Difference up to maximum
sewing foot pressure
reached at the upper
material thickness limit.
Material thickness at which
the increase in sewing foot
stroke should start.
Material thickness up to
which the increase in sewing
foot pressure should occur.