Table of Contents
Advertisement
34
Fig. 16: Threading the needle thread (two-needle machine) (7)
⑲
(19) - Holes in thread lever
(20) - Upper thread guide
(21) - Lower thread guide
16. Feed the left thread from the right to the left through the upper
hole of the thread lever (19).
17. Feed the right thread from the right to the left through the
lower hole of the thread lever (19).
18. Feed the left and the right thread through the upper thread
guide (20).
19. Feed the left and the right thread through a hole in the lower
thread guide (21).
20. Feed the threads as shown through the thread guide on the
needle holder (22).
21. Unlock the roller foot. Insert the thread through the needle
eye (23) in such a way that the loose thread end faces the hook.
22. Pull the thread through the needle eye (23) in such a way that
the loose thread end has a length of approx. 4 cm with the
thread lever (19) at the highest position.
⑳
(22) - Thread guide on needle holder
(23) - Needle eye
Operating Instructions D887 e-con - 00.0 - 11/2023
Operation
Advertisement
Table of Contents
